First post, by kalanneni
Hello everyone,
I've recently purchased a retro PC:
Abit BH7-E motherboard
Celeron 2 Ghz
ATI Radeon 9600XT
Kingmax 1 Gb 400 DDR RAM
Everything is working fine, Win Xp Sp3 is running without problems. Then I wanted some improvement, and ordered a Pentium 4 2.4/1Mb/533 CPU, in allegedly working condition. I swapped the CPU-s and powered on the PC, but there was no POST (every moving part started to work, but no speaker beep and VGA signal). Swapped back to the Celeron, and everything working fine again.
I changed the CMOS battery and done a CMOS reset but nothing happened.
The CPU is officially supported by the motherboard. What could be the problem? (Mobo specifications says using DDR 400 means overclocked status, maybe I need to downgrade the RAM for using 533 FSB CPU?)
Thank your for your help!
Win98SE PC - ASUS P3BF, PIII 500, 256 Mb RAM, V3 2000, SB Live
WinXP PC - ABIT BH7, Pentium 4 2.4, 1 GB RAM, ATI Radeon 9600XT