VOGONS


First post, by 8bitfink

User metadata
Rank Newbie
Rank
Newbie

I have an issue with installing Win98SE, it gets to Windows is copying files please wait..
Then it just stays there nothing?

I have FDISK
Deleted Partitions
Created a new Primary Partition
Formated C:

I set parameters in BIOS CDROM,C,A
Disabled Virus Checker

Removed all hardware except GFX card
Have PS2 Kb and mouse connected

Running PII-300MX
64k RAM [have more though took the others out in case]

Any ideas is driving me nuts, never had an issue like this before.

Reply 1 of 6, by PD2JK

User metadata
Rank Oldbie
Rank
Oldbie

64k of RAM, you need 640. 😉
Of course you mean 64 MB.

Do a memory test, memtest86+ for example.
Does the floppy work? Or you could disable it in the BIOS. Maybe the setup looks for its existence.

i386 16 ⇒ i486 DX4 100 ⇒ Pentium MMX 200 ⇒ Athlon Orion 700 | TB 1000 ⇒ AthlonXP 1700+ ⇒ Opteron 165 ⇒ Dual Opteron 856

Reply 2 of 6, by 8bitfink

User metadata
Rank Newbie
Rank
Newbie

🤣 sorry typo, I just thought of that when I went inside what I posted ; My mind thinks to much.
Have not tested MEM though had Windows 2000 on it previous and worked fine.
Floppy does work as I ran FDisk with it on Win98 Startup Disk and Formatted.
I will see what happens when I disable it - thanks.