Reply 40 of 48, by Jasin Natael
- Rank
- Oldbie
Con 2 botones wrote on 2021-10-06, 14:45:All right, it is not the chipset then, since yours is SIS. Then it should be LithTech+K6-2 CPU […]
Jasin Natael wrote on 2021-10-06, 14:11:Something is up. I'm thinking it is a issue with the FPU in the K6 architecture and not the chipset, since I don't have the VIA […]
Something is up. I'm thinking it is a issue with the FPU in the K6 architecture and not the chipset, since I don't have the VIA chipset in my rig it is SiS.
I do have a a Pentium MMX 166 I could install to test with but I'd rather not as I had serious pains getting the K6-3+ to work properly and I'd rather not fight that battle again.
I do have a few different PIII machines that I could test with. I don't have a PII 400 but I do have a PIII 450 Katmai somewhere that I can try to test with.
The main problem is finding the time. The only fully set up PIII I have right now is a socket 370 and it has a 1GHZ Coppermine installed, I'd have to dig out a slot 1 system to try the 450 one.
But I am curious....All right, it is not the chipset then, since yours is SIS.
Then it should be LithTech+K6-2 CPUI do have a couple slot1 (PII 450 and PIII 750) around to test it, but If I recall properly it ran more than ok in those.
Will check and post results when I find the time.
Yes I fully suspect that it will run just fine on a PII/PIII. Seems like it hates K6 for some reason, which is odd. I wonder what the latest patched release of blood2 is? Maybe they fixed it at some point?