First post, by Fin
Hi All,
I have the following hardware:
Mac Mini i7 2012 16GB RAM
M-Audio Keystation 88
Yamaha UW500
Yamaha MU50
I have tested all the above individually and all is well.
I then connect it up so that I can use the Keystation 88 as an input interface (connected via usb to my Mac) - this too is working because I can play soft instrument and snag score etc.
I then install the um150mx Yamaha drivers as I am using Monterey as my OS (12.2.2) and connect the UW500. This two is working (at leas t in part) as I can capture and record audio from it in to Logic Pro
I connect the MU50 Synth to the UW500 via the dedicated serial ports and while I can still record demo audio from the MU50, I cannot get it to "see" any midi signal sent to the UW500.
I notice that some of you also use the UW500, albeit mainly with PCs, I was wondering if I have to perform some kind of black magic or arcane ritual before I can get these two compatible devices to actually talk to one another. Any assistance would be most heartily welcomed.
PS: I have also tried couple the devices wit midi cables to zero effect. The interlink cable I am using is an official 8 pin mini-din style Apple serial cable and I have double checked it's continuity.
Thank you in advance for you patience,
Fin