I removed everything I had regarding this guide:
https://wiki.preterhuman.net/Gravis_UltraSoun … s_in_Windows_95
and then installed the 4.11 Software from archive.org: https://archive.org/details/gravis_ultrasound_v4.11
I was only able to start "install.exe" from in Windows 95, not DOS. Because in DOS the installer didn't recognize Disk2, but in Windows it was fine. At the end, I had everything in "C:\Ultrasnd".
Then, from DOS, I started "setup.exe" (inside of "C:\Ultrasnd"). Everything worked fine, the driver installed and my autoexec.bat was automatically updated. After I added "C:\Windows" to the PATH-Variable in my autoexec.bat, I was able to (automatically) install Software like "Patch Manager", "UltraSound Configuration" and "UltraSound Mixer".
This is my current (updated) autoexec.bat:
The attachment IMG_9246.jpg is no longer available
I loaded some Patch files like this:
The attachment IMG_9244.jpeg is no longer available
(not sure, if I selected the correct ones and if I need all of them...)
The configuration looked like this:
The attachment IMG_9236.jpeg is no longer available
(I also tried different values here, like IRQ 5 instad of 3)
And the Windows Multimedia-Seupt and DeviceManager looks like this:
The attachment IMG_9239.jpeg is no longer available
(not sure, if it is correct, that the device manger only shows my MPU-401-Card.)
Current state in Windows:
- Wave-Files still playing find - Win95 Startup-Sound plays also fine.
- I have Sound in Doom, but only high-pitched noise, no melody
- No sound in Monkey Island
- Weird noise in The Settlers 2
Current state in Dos:
- Doom works absolute find with FX-Sound and Music
- No sound in Monkey Island
- Only FX sound in The Settlers 2
Edit:
After executing sbos.bat from the C:\ultrasnd directory and hearing the confirmation "SBOS installed," I had sound in Monkey Island under DOS. However, I've had no luck getting sound to work in Settlers 2 so far.