Here is the output from CWDINIT like you instructed:
----------------------------------------------------------
CrystalWare(tm) Audio Initialization Utility, Version 2.841x
Copyright(c) 1997 Crystal Semiconductor Corp. All Rights Reserved.
* Testing for SIS IOCHRDY chipset.
* Found C:\TEMP\CWDAUDIO.ini.
* Making sure Crystal chip is in wait for key state.
* Plug N Play BIOS Detected.
* Override Plug N Play Configuration.
* Sending Key
WSS: I/O = 534, IRQ = 5, DMA0 = 1, DMA1 = 0.
OPL3: I/O = 388, IRQ = Disabled.
SBpro: I/O = 220.
Joystick: I/O = 200.
Control: I/O = 538, IRQ = Disabled.
Logical device 3 (MPU-401) disabled.
Logical device 4 disabled.
Logical device 5 disabled.
* Card is Configured.
* Modifying blaster environment variable.
* Loading Minicode
* Downloading Firmware Code, Version 17.
* Both Crystals and DMA timing on.
* Staying Resident.
--------------------------------------------------------
I do not have any PNP TSR´s loaded. I see that CDWINIT detects a PNP BIOS, I would have thought that this BIOS was not PNP but perhaps it is? There´s nothing to suggest it is in the BIOS settings as far as I can tell.
Also in the screenshot i posted earlier it says "120 ISA Plug and Play card(s) detected". Does that mean that Orphinit thinks there´s 120 PNP cards in my system? 🤣