First post, by Ulfenknulfen
- Rank
- Newbie
Hello folks!
To make wavetable cards swappable, you convert a removable hard drive caddy with this board, to take a wavetable card. Then you hook it up with an IDE cable to the wavetable header on soundcard. Then you can pull the caddy out with the wavetable board in, and swap it over for another one, without opening your case, and possibly having to remove your soundcard also to do it, if access is tight.
An IDE cable is simply converted as a connection cable and my board is installed.
In addition, you can easily supply the wavetable card with power.,
Simply move the jumpers. I have ordered the first PCB´s and report here on further progress.
best regards
Paddy
P.S.
Thanks to BitWrangler for helping me to write the text clearly
My English is not the best, should there be any misunderstandings, please let me know!
Unfortunately, some don't seem to provide that.
🎵 Waveblaster Adaptor for IDE-HDD Swap Frames
🎧 Beepblaster 1.0 Wavetable Module