Reply 261 of 269, by Skalabala
Reply 262 of 269, by lukas12p
It is not stable above 580 MHz in Win98. I have tested two 400 MHz and one 450 MHz versions with 2,3V on MVP3 and ALI boards.
Similar K6-2+, I have two 550 MHz versions, but under Win98 they are not stable above 600 MHz with 2,4V. Maybe I/O voltage is the problem?
Reply 263 of 269, by Mentat-vvo
galanopu wrote on 2021-02-12, 00:55:
Is this good enough?
That was close but you should hit 5000 to be in the club ))
2x PPro@250-1M /TyanS1834D /512Mb/VBanshee
Iskra 1031 Issue 2 - i8086 PC/XT Clone from USSR
Reply 264 of 269, by galanopu
To my understanding I have to use some other older version of windows.
Let's mod everything! Check my youtube channel:
Interested in my devices? Check my store:
Reply 265 of 269, by Skalabala
Hi members 😀
I am slightly back at this 😁
I got super lucky to get my hands on an ASUS P5A 1MB cache motherboard 😁 😁
However unfortunately it is on the unstable side, 🙁 I will venture into it to replace the capacitors and do whatever I can to get it stable.
For now this is what I have, I am impressed with the speed of the motherboard though 😀 😀
This was done with K6-3+ @550MHz Stock GF3 Ti200 and 128mb ram, this is my personal best at 550mhz, and I have only spent one night to get here 😁
https://drive.google.com/file/d/1WlqXrcgE0kYo … iew?usp=sharing
Reply 266 of 269, by Skalabala
Reply 267 of 269, by lukas12p
That is insane score!
What is Your setup and BIOS/reg settings?
I have used ASUS P5A-B v1.04 + Geforce 2 GTS + K6-3+400@617 MHz
Playing in BIOS settings doesn't make real difference
I have noticed that Voodoo3 is about 30% slower on that board than on Gigabyte and score on Asus is the same with and without AGP drivers.
Reply 268 of 269, by Skalabala
Yes that is a good score 😀 I feel confident to say I will go over my goal of 6000 😁
So the board is P5A 1.06 with 1024Kb cache
Graphics card is a chaintech Ti200 BIOS moded
Ram I am using PC150(single rank) and sometimes Twinmos(duel rank) 6ns 128mb
ALi driver 1.82E and ALi utility set to turbo.
Only reg settings are for Fast NAJ and RAS timing to 4T.
And then CTU tweak just to double check the write ordering.
I am still experimenting as I have only tried this one windows disk and ALi 1.82 and DX7.0A
Yes there is some sort of bug with Voodoo 3 😒
Reply 269 of 269, by Skalabala
So this happened last night 😁