First post, by alpm
Hi folks, I've recently purchased this Voodoo 3 1000 from eBay (see attached pictures).
The first tests showed a very garbled image. I saw that some caps had some dents on them (as in 20220112_013008.jpg), so I've replaced all 5 electrolytical caps (with same spec ones from Panasonic).
After the recap, the image was more "consistent" and with less flickering. It is still "garbled" with vertical artifacts and unreadable text in DOS. Pressing the GPU on the top right corner produces some changes in the image, but nothing major. Do you folks have any suggestions on how to proceed?
I took some screenshots from the DOS Video Function Timing Test from Roy Longbottom (extracted from Phil's DOS benchmarks).