VOGONS


EpoX EP-M762A

Topic actions

First post, by sirotkaslo

User metadata
Rank Member
Rank
Member

Hi,

Does anyone know which CPUs are supported on the EpoX EP-M762A? Can't find much info online.

Thank you!

Reply 2 of 6, by sirotkaslo

User metadata
Rank Member
Rank
Member

Thanks, didn't look at the usa epox page, global didn't have this one listed, or I couldn't find it.

Is there any good online info about which XPs can be modified into MP?
thank you!

Reply 4 of 6, by ise

User metadata
Rank Newbie
Rank
Newbie

This article suggests that Athlon XP / Palmino should be ok, as well as Duron / Morgan.

Reply 5 of 6, by sirotkaslo

User metadata
Rank Member
Rank
Member

Thank you both! MPs are nowhere to be found in my country, even XP are hard to get now, but still way easier. I have no real use for dual config, but it's nice to have one system like this 😀

Reply 6 of 6, by sirotkaslo

User metadata
Rank Member
Rank
Member

Going to "revive" my own thread, I replaced all of the caps, got a duron 1200 which should work, but nothing, no beeps, nothing. Could this be a corrupt bios or is this board toast?