First post, by Nemo1985
Stuff with socket 462 platform get curioser and curioser.
I bought a (sold as) working abit kr7a, but when I tried it I had black screen only with the debug card showing: ----.
Then I decided to use a pci card instead of the working test agp card.
Boom it started booting fine! Then i switched back to agp card and black screen again!
So I did something not advisable: I booted with both agp and pci cards, I connected the agp to the monitor, pc booted fine after complaining of no video signal. Then with the pc turned on I took off the PCI card, pushed the reset switch and the pc rebooted and worked fine with agp only card installed.
I then tried another thing: scsi card on pci slot and the agp card connected: working again.
Turn off, removed the pci card and turned on: black screen.
Yes I tested different agp videocards.
I'm using the latest available beta bios for the board but an older bios made no difference.
Any help, please?