RJ45 network card for Abit BH6 and Asus A7S333 (Win98SE) \ VOGONS

RJ45 network card for Abit BH6 and Asus A7S333 (Win98SE)

Topic actions

Post a reply

First post, by bdtbr

Posted on 2023-06-24, 13:15

bdtbr Offline

Rank Newbie

Rank: Newbie
Posts: 7
Joined: 2023-04-19, 17:31

Dear Retro People,

As far as I know both mainboards are PCI 2.1 compliant.
I am looking for a compatible network card for Win98SE.
10/100 would be enough of course, but it can be 10/100/1000.

I am looking for the card from Hungary, and eBay in Europe.

Can You give me some advice please?
For example, compatible models or chips.

This card is accessible near me, and it's datasheet says it's PCI 2.1 compatible:
https://www.assmann.com/product-pdf/aat/4016032310778?PL=en (RTL8169SC)

Or this maybe?
https://www.conrad.hu/p/renkforce-halozati-ka … 0-mbits-1710336 (also RTL8169SC)

Could these work under Win98SE?

Thank You in Advance! 😀

Regards,
Tibor

Reply 1 of 6, by Grzyb

Posted on 2023-06-24, 13:28

Grzyb Offline

Rank Oldbie

Rank: Oldbie
Posts: 1731
Joined: 2019-05-08, 13:47
Location: Laniakea Supercluster

I tried RTL8169 cards with Windows 98SE - no problems.

Nie tylko, jak widzicie, w tym trudność, że nie zdołacie wejść na moją górę, lecz i w tym, że ja do was cały zejść nie mogę, gdyż schodząc, gubię po drodze to, co miałem donieść.

Reply 2 of 6, by bdtbr

Posted on 2023-06-24, 15:35

bdtbr Offline

Rank Newbie

Rank: Newbie
Posts: 7
Joined: 2023-04-19, 17:31

Grzyb wrote on 2023-06-24, 13:28:

I tried RTL8169 cards with Windows 98SE - no problems.

Good news! Thank You for sharing.

Reply 3 of 6, by shevalier

Posted on 2023-06-24, 16:32

shevalier Offline

Rank Member

Rank: Member
Posts: 456
Joined: 2023-02-26, 16:35
Location: Kherson, Ukraine

Why not a 3Com?
Definitely more in line with the time range. There should be a lot of these cards on sale.

Aopen MX3S, PIII-S Tualatin 1133, Radeon 9800Pro@XT BIOS, Diamond monster sound MX300
JetWay K8T8AS, Athlon DH-E6 3000+, Radeon HD2600Pro AGP, Audigy 2 Value

Reply 4 of 6, by bdtbr

Posted on 2023-06-24, 19:11

bdtbr Offline

Rank Newbie

Rank: Newbie
Posts: 7
Joined: 2023-04-19, 17:31

shevalier wrote on 2023-06-24, 16:32:

Why not a 3Com?
Definitely more in line with the time range. There should be a lot of these cards on sale.

Thanks, I will look after.

Reply 5 of 6, by rasz_pl

Posted on 2023-06-25, 01:03

rasz_pl Offline

Rank l33t

Rank: l33t
Posts: 3567
Joined: 2017-06-04, 00:57

I dont think you need any compatibility lists, all 10/100 PCI cards were made for those kinds of systems and will work fine. 1Gbit ones you need to look for win98 driver availability (and I would stay away from Realtek, their 1Gbit cards consume lots of CPU)

Open Source AT&T Globalyst/NCR/FIC 486-GAC-2 proprietary Cache Module reproduction

Reply 6 of 6, by bdtbr

Posted on 2023-06-25, 11:07

bdtbr Offline

Rank Newbie

Rank: Newbie
Posts: 7
Joined: 2023-04-19, 17:31

rasz_pl wrote on 2023-06-25, 01:03:

I dont think you need any compatibility lists, all 10/100 PCI cards were made for those kinds of systems and will work fine. 1Gbit ones you need to look for win98 driver availability (and I would stay away from Realtek, their 1Gbit cards consume lots of CPU)

Thanks!

Go to top of page Go to top of page

Back to General Old Hardware

Main menu

Common searches