Ypu posted in the correct section 😀

When you configured the game, did you get a choice of configuring 1) MUSIC, and 2) SOUND EFFECTS ? Perhaps MIDI for music, and SoundBlaster for sound?

What did you choose?

There is no choice like u say , but i did configure soundblaster 16/AWE32 , IRQ 5 , DMA 5 , Port 0x220 , im not using MIDI at all i turned it off from D-Fend/Dosbox. Sound is clear and game runs perfect when i dont talk, but its the fact game and sound stuttering/distorting especially when anyone talks , i hardly hear , but sometimes i can hear clear words/sentences , but as i said its stuttering randomly , i think its messing up due to wrong settings. Please help me guys...

How do you configure it if there's no choice??
dosbox defaults are irq7 dma1 hdma5

I meant the toonstruck setup , when i installed it , i've set it to soundblaster 16/awe32 , IRQ 5 , DMA 5 , sound is perfect and gameplay runs perfect also but sound gets distorted when there is a talking.

Thats because irq5 is wrong.

Well , my dosbox sound settings are default
sbtype=sb16
sbbase=220
irq=7
dma=1
hdma=5
mixer=true
oplmode=auto
oplrate=2205

And toonstruck config
[DIGITAL]
DeviceName = Sound Blaster 16/AWE32
DeviceIRQ = 5
DeviceDMA = 5
DevicePort = 0x220
DeviceID = 0xe018
DeviceMonoID = 0xe017
Stereo = 0
TimerRate = 60
Flip = 0

Well , i tried normal Sound Blaster , IRQ 5 , DMA 1 on toonstruck setup that worked too , but i had same problem.

Could you PLEASE stick to irq7 for the toonstruck config?

Yea dont worry i did , im still having same problem.

Look - here are the DOSBox values:

sbbase=220
irq=7
dma=1
hdma=5

And is this your Toonstruck values?

DeviceName = Sound Blaster 16/AWE32
DeviceIRQ = 7
DeviceDMA = 5
DevicePort = 0x220

See what could be wrong?

Or maybe this will help:

1DOSBox        Toonstruck
2------------  ----------
3sbtype=sb16   DeviceName = Sound Blaster 16/AWE32
4sbbase=220    DevicePort = 0x220
5irq=7         DeviceIRQ = 7
6dma=1         DeviceDMA = 5
7hdma=5

Nvm , after million try i found the perfect sound combination for toonstruck
In dosbox settings

sbtype=sb2
sbbase=220
irq=5
dma=1
hdma=5
mixer=false
oplmode=auto
oplrate=44100

nosound=false
rate=22050
blocksize=4096
prebuffer=10000000 (yea thats true)
Also i changed some more
frameskip : 0
scaler : none
output : overlay
memsize : 32

And my toonstruck configuration is
DeviceName = Sound Blaster
DeviceIRQ = 5
DeviceDMA = 1
DevicePort = 0x220
DeviceID = 0xe000
DeviceMonoID = 0xe000
Stereo = 0
TimerRate = 60
Flip = 0

That may seem like impossible but it worked very well for me , anyways thank you for help.

The Force is weak in you, young Chrono.

reactivate this, just to answer it properly:
the problem is not the sound settings, it's the CPU speed.
set the cycles= to something small, maybe 30k or less.

Ok I made some experience about the configurations. Just insert those values into TOONSTRK.CFG which is in the toonstruck gamefolder (I tried it on xp and kubuntu 8.04 and on kubuntu you have to change the video values too because the toonstruck setup can't autoconfig your video card)

[DIGITAL]
DeviceName = Sound Blaster 16/AWE32
DeviceIRQ = 5
DeviceDMA = 5
DevicePort = 0x220
DeviceID = 0xe018
DeviceMonoID = 0xe017
Stereo = 0
TimerRate = 60
Flip = 0

[VIDEO]
UniVBE = 1
Width = 640
Height = 400
PaletteWidth = 8
Linear = 1

It works perfect now. Enjoy.

Please ONLY use irq7 (dosbox default).