Windows 95 with NE2000 Drivers (help) \ VOGONS

Windows 95 with NE2000 Drivers (help)

Topic actions

First post, by ScreenGems98

Posted on 2013-02-16, 15:39

ScreenGems98 Offline

Rank Newbie

Rank: Newbie
Posts: 8
Joined: 2013-01-30, 03:19

Can someone help me? I activated NE2000 drivers in ykhwong's build and I try to scan my hardware, and I never find it:

(W950109B.ZIP drivers 4 the win!!1!)

As you can see, it never shows up.
Can someone help get my network running with NE2000? I'll accept any help that I get.

Alexander

Reply 1 of 5, by ykhwong

Posted on 2013-02-17, 15:42

ykhwong Offline

Rank Oldbie

Rank: Oldbie
Posts: 627
Joined: 2004-03-17, 15:35

You can also try other builds like MB6 for the ne2000 passthrough.
Have you already installed pcap library and configured the ethernet device properly?
http://home.arcor.de/h-a-l-9000/ne2kstuff/db_ne2000.html
DOSBox is intended only for playing DOS games and support for experimental builds is limited.

Reply 2 of 5, by h-a-l-9000

Posted on 2013-02-17, 17:06

h-a-l-9000 Offline

Rank DOSBox Author

Rank: DOSBox Author
Posts: 4511
Joined: 2005-02-23, 00:14

Most interesting for troubleshhoting here is the output of the DOSBox status window.

1+1=10

Reply 3 of 5, by ScreenGems98

Posted on 2013-02-18, 02:58

ScreenGems98 Offline

Rank Newbie

Rank: Newbie
Posts: 8
Joined: 2013-01-30, 03:19

I did. I scan new hardware, and all I get is that "Plug and Play BIOS", which only makes WIN95 fail to boot.

Alexander

Reply 4 of 5, by Zorbid

Posted on 2013-02-18, 22:19

Zorbid Offline

Rank Member

Rank: Member
Posts: 436
Joined: 2002-08-30, 18:38

h-a-l-9000 wrote:
Most interesting for troubleshhoting here is the output of the DOSBox status window.

@ScreenGems98: Could you post it?

Reply 5 of 5, by zbyhu

Posted on 2014-05-02, 11:46

zbyhu Offline

Rank Newbie

Rank: Newbie
Posts: 3
Joined: 2014-05-02, 11:38

Open DosBox configuration file (dosbox.conf),find [ne2000], and set your network adapter to comunication with dosbox (you should see, adapter list in dosbox status window), e.g. set realnic=1 (1 is a ID of adapter).

Go to top of page Go to top of page

Back to DOSBox Development