First post, by serrith
Lo there, i hope anyone can help me here but i particularly hope Phil from Phil's Computerlab could answer this seeing as he owns multiple sound canvas devices.
I have soundcanvas 55 MKII for quite some time now and it worked flawlessly. It has never been dropped, abused, manhandled or anything else.
I always connected my computer trough a roland UM one midi interface to the Midi in 1 connector on the back of the sound canvas.
Today i cannot seem to get any midi through Midi in 1, but it works on Midi in 2, unfortunately that connector is on the front of the device.
I can confirm the Midi in 1 works, when i feed midi to it and then connect an MT32 to the THRU port of the SC-55 (daisy chaining) the MT32 does receive the signal.
So the connector on the SC55 isn't dead.
I have the feeling this is a button combination problem, while moving it and reconnecting it i probably pressed a combination that switched the primary input to the secondary MIDI in port ?
Can anyone help me out ?
The manual talks about switching Midi in 1 and 2 but thats if you connect more than one input to it and i when i try it it changes nothing.
Help me Obi whoeverKenobi, you are my only hope !