i'm running a Tualatin System with a ISA Slot,
i can't get the TT1816 with ADI1816 Driver for DOS Detectet.
The Driver tells me the BIOS has'nt detectet the PnP Card 🙁
It works fine under Windows ME.
Anyone knows a Solution for this Problem ?
The Driver seems to have no switches for Forcing initialisation..
Just a shot in the dark: have you tried changing the "Plug and Play OS" BIOS setting (if your system has one)? On some systems, only devices necessary to boot will be initialised when it is set to Yes, leaving everything else to the operating system.
i'm running a Tualatin System with a ISA Slot,
i can't get the TT1816 with ADI1816 Driver for DOS Detectet.
The Driver tells me the BIOS has'nt detectet the PnP Card 🙁
It works fine under Windows ME.
Matthias
AD1816 based cards needs it's PNP id in initialization string in config.sys file.
1DEVICE=AD1815_6 [switches]
where
1/ID Use specified Vendor ID
Just look into README.TXT from Base1_Drv_dos_9.2.exe
You have to figure out which ID has your card. Simplest way is to run Speedsys v4.78 in plain DOS.
BTW. I have Highscreen Soundboostar 16 card (MDK1605) which seems to be clone of TT1816.
This card has very good compatibility with DOS titles (even Titus the fox is running with sound on my KT7A Barton build), however OPL3 compatibility is not that good (AT2 sounds incorrectly compared to YMF724).