VOGONS


First post, by quicknick

User metadata
Rank Oldbie
Rank
Oldbie

Hi everyone. Got this board with a rather strange jumper arrangement for setting the CPU voltage.
The twin jumper JV1 (right above the CPU socket in the picture) seems to be switching between +5v and whatever the VRM outputs, and there are four other jumpers in each corner of the socket (JP3, 4, 5, 6) that connect the CPU power plane directly to +5v when shorted. However there are no jumpers to choose what voltage the VRM puts out...

All of the jumpers are documented on the board, except the ones i mentioned and two others labeled JV2, JV3 that are near the VLB slots and i'm certain they got nothing to do with CPU voltage. I searched the net and there is nothing about this board to be found ...

J433-A.jpg
jumpers.jpg

Reply 1 of 1, by tomaszdko

User metadata
Rank Newbie
Rank
Newbie

I know this is an old topic . I have the same problem with setting my motherboard to 3v . I was looking for anything on the internet but I found nothing .