VOGONS


WDC VGA 16 (WD90C00-JK)

Topic actions

First post, by derSammler

User metadata
Rank l33t
Rank
l33t

Got this card together with a 286 mainboard from an old Peacock PC. Seems to be the same card as the Paradise PVGA1A-JK after WD bought them. Even the FCC ID is the same... Is that card any good? Would it provide enough speed for something faster than a 286?

The attachment IMG_20171222_111731450.jpg is no longer available

Reply 1 of 29, by Jo22

User metadata
Rank l33t++
Rank
l33t++

Not sure if it would provide good performance in anything post-286,
but generally speaking, the PVGA1X and WD90CXX series are very compatible and have mode utilities even.

The last model, WD90C31, even had support for drawing GDI graphics primitives.
According to that site, it was one of the fastest ISA cards.

Another advantage is the good driver support for early software titles.
For example, Wonderland by Magnetic Scrolls (a game) supports its 800x600 mode (SVGA).
Same for early CAD software, Windows 2.x, GEM or Public Domain software (picture viewers, etc.)

"Time, it seems, doesn't flow. For some it's fast, for some it's slow.
In what to one race is no time at all, another race can rise and fall..." - The Minstrel

//My video channel//

Reply 2 of 29, by matze79

User metadata
Rank l33t
Rank
l33t

This is a SLOW Card, in a Class with OAK VGA and Trident 8900

Very combatible with older Video Modes, but not fast at all 😀

The Later WDC Chips mentioned above are the fastest 320x200 Performers Made for ISA.

A Card using it is the Diamond Speedstar 24X.

http://www.vgamuseum.info/index.php/component … tal-wd90c31a-lr

https://www.retrokits.de - blog, retro projects, hdd clicker, diy soundcards etc
https://www.retroianer.de - german retro computer board

Reply 3 of 29, by derSammler

User metadata
Rank l33t
Rank
l33t

Tested the card today and yes, it's quite damn slow. Have to check if the other two ISA VGA cards I have are faster.

Reply 4 of 29, by Ozzuneoj

User metadata
Rank l33t
Rank
l33t
derSammler wrote:

Tested the card today and yes, it's quite damn slow. Have to check if the other two ISA VGA cards I have are faster.

What program is that? I have lots of cards to test and I like benchmarks with copious amounts of data. 🤣

Now for some blitting from the back buffer.

Reply 5 of 29, by derSammler

User metadata
Rank l33t
Rank
l33t

Dr. Hardware 9.0e

Reply 6 of 29, by derSammler

User metadata
Rank l33t
Rank
l33t

When you think it can't go any worse..

The attachment IMG_20171225_223601511.jpg is no longer available

OCTEK EVGA-16

Reply 7 of 29, by mrau

User metadata
Rank Oldbie
Rank
Oldbie

at least its not in the negative numbers - its not yet spitting data back at You :p
almost anything will be faster, there are some cheap things on ebay every day

Reply 8 of 29, by derSammler

User metadata
Rank l33t
Rank
l33t

I still have a CL5420, which did 4.6 MB/s when tested yesterday. But I have to reflow the video chip due to bad solder joints.

Reply 9 of 29, by BSA Starfire

User metadata
Rank Oldbie
Rank
Oldbie

I ran some tests with Dr Hard 3.5e on my 386 DX 25 system. Thought you might be interested in the results. All cards are ISA.

First up is a 512K Western Digital Paradise WDC90C30

The attachment WDC90C30.JPG is no longer available

As you can see this is a very fast card for DOS, it only goes downhill from here!
Next is a 1MB OAK OTI-077

The attachment OAK OTI-077.JPG is no longer available

Next is a 1MB Trident 8900B jumpered for 16-bit operation.

The attachment Trident 8900B.JPG is no longer available

finally a 512K Realtek RTG3105iEH, 120ns RAM on this card plus they only operate in 8-bit mode despite being a 16-bit card.

The attachment Realtek RTG3105ieh.JPG is no longer available

Anyone got anything slower than that Realtek?

Best regards,
Chris

286 20MHz,1MB RAM,Trident 8900B 1MB, Conner CFA-170A.SB 1350B
386SX 33MHz,ULSI 387,4MB Ram,OAK OTI077 1MB. Seagate ST1144A, MS WSS audio
Amstrad PC 9486i, DX/2 66, 16 MB RAM, Cirrus SVGA,Win 95,SB 16
Cyrix MII 333,128MB,SiS 6326 H0 rev,ESS 1869,Win ME

Reply 10 of 29, by derSammler

User metadata
Rank l33t
Rank
l33t

Thanks. Got a WDC90C30 today, so I know now what to expect when I use it. 😁

Reply 11 of 29, by Jo22

User metadata
Rank l33t++
Rank
l33t++

Congratulations! 😀 Some cards with that chip were also named PVGA1D, by the way. Probably as an allusion to the ancestor PVGA1/PVGA1A (later named WD90C00)..

"Time, it seems, doesn't flow. For some it's fast, for some it's slow.
In what to one race is no time at all, another race can rise and fall..." - The Minstrel

//My video channel//

Reply 12 of 29, by TimWolf

User metadata
Rank Member
Rank
Member

Greetings,

Sorry for the semi-necro-bump, but I'm looking for jumper settings on the PVGA1B wd90c00-jk. Just installed extra ram, and wondered if I need to do anything to access it. I'm going to locate and run the test program above. First I need to get some drives put in.

Thanks in advance.

Reply 13 of 29, by derSammler

User metadata
Rank l33t
Rank
l33t

Extra RAM should not require any jumper changes. The jumpers are for adjusting display settings and timing. My card in the picture above has maximum RAM, so just set the jumpers as shown, if they aren't that way on your card already.

Reply 14 of 29, by TimWolf

User metadata
Rank Member
Rank
Member

Cool. That is how my jumpers are set. Hopefully now that it is the weekend I get to mess with this and get a HDD in the unit. So far it's just been playing with ram upgrads on the MB and video card, plus fixing the battery. Can't wait to see what she can do.

Reply 15 of 29, by watson

User metadata
Rank Member
Rank
Member

I got this card as part of a bundle, but it's missing the VGA BIOS ROMs (I don't know why anyone would pull them out, they probably didn't know what they were doing).
Naturally, this means the card doesn't work, i.e. there is a black screen on boot.

I ordered two 16Kx8 EPROMs (27C128, same as on OP's card) from China. The BIOS can be found on a Russian site.
I want to know if there are any DOS-based utilities for flashing ancient cards like this (with the help of a secondary PCI card) or am I basically SOL if I don't have a programmer.
The TL866 costs about $50, but I'm not willing to spend that much to fix this ultra-slow card. I have been planning to buy that thing for a while, but I haven't had a need for it yet.

If there aren't any such tools, this should supposedly be doable using a Realtek 8139 NIC (setting the window size to 16K with RSET8139.exe and flashing with RTFLASH.exe).
Flashrom might also be an option, but it doesn't seem to support ROMs smaller than 64K.

Reply 16 of 29, by derSammler

User metadata
Rank l33t
Rank
l33t

You can't "flash" an EPROM without a programmer. It's not flash memory. You can not use a Flash ROM (or EEPROM for that matter) either and flash it that way, as there's simply no write logic present.

Reply 17 of 29, by root42

User metadata
Rank l33t
Rank
l33t
derSammler wrote:

You can't "flash" an EPROM without a programmer. It's not flash memory. You can not use a Flash ROM (or EEPROM for that matter) either and flash it that way, as there's simply no write logic present.

I think this was a rather colloquial use of the term 'flash'. You can write EEPROMs just fine in NICs or e.g. an XT IDE card. Did that myself for the XT IDE BIOS.

Last edited by root42 on 2018-09-03, 18:55. Edited 1 time in total.

YouTube and Bonus
80486DX@33 MHz, 16 MiB RAM, Tseng ET4000 1 MiB, SnarkBarker & GUSar Lite, PC MIDI Card+X2+SC55+MT32, OSSC

Reply 18 of 29, by derSammler

User metadata
Rank l33t
Rank
l33t

That only works if the card supports writing EEPROMs. You can't just toss in some NIC, put an EEPROM onto it and use it as a programming device.

If a NIC is used that supports writing/flashing, you still can not use it for an EPROM.

Reply 19 of 29, by root42

User metadata
Rank l33t
Rank
l33t

Nah, he didn't say any old NIC. But some of the rtl8139s seem to support flash and eeprom:

https://contents.driverguide.com/conten ... )%2FREADME

Why would a simple EPROM not work? Aren't both EEPROM and EPROM 12V programmable? I would assume that a 27C128 EPROM would be compatible to a similar EEPROM. But I only have limited knowledge about *PROMs...

YouTube and Bonus
80486DX@33 MHz, 16 MiB RAM, Tseng ET4000 1 MiB, SnarkBarker & GUSar Lite, PC MIDI Card+X2+SC55+MT32, OSSC