First post, by Intel486dx33
Here is how to Easily build a WinNT 3.51 computer.
Really Easy to build and drivers are included in WinNT 3.51
Hardware Specs:
Motherboard - Intel Shuttle Slot-1 or any bare bones Slot-1 motherboard should do.
CPU - Intel 233mhz or greater.
RAM - 128mb.
Graphics - S3 trio 64 , PCI
Audio - Sound Blaster 16 Vibra ISA
Networking - 3com 3c509
Hard-drive - Seagate 160gb 72000rpm IDE ( 4gb partitions )
CDROM 16x
Floppy 1.44
Case - Basic ATX
PSU - 300 watt
This computer was really easy to build and set up.
Drivers are vanilla to WinNT 3.51.
For Audio just add the Sound Blaster compatible driver in Control panel -> drivers.
Networking - select TCP/IP and add 3com 3c509
Graphics - S3 trio is picked up automatically.
Really Easy to setup and Rock Solid, Fast and very stable.
Everything is working.