dulu wrote on 2021-01-14, 18:11:
Is there any physical diferrence between these two dimm`s from first picture? I just bought pair of dimm`s from second pic with different label. And i wonder what is the best method to remove these scratches, maybe masking tape and glossy spray paint will be enough?
The first pair uses Winbond (probably BH6) chips the second pair uses Promos chips.
The first pair will do 200(400) MHz 2,2,2,5 timings at ~2.7V but the second pair probably wants 2,3,2,6 or 2,2,3,6 or even 2,3,3,6 timings.
If you are going to use both pairs at the same time I would start with 200(400) MHz 2,3,3,6 timings at 2.7V and then try to lower them.
New PC: i9 12900K @5GHz all cores @1.2v. MSI PRO Z690-A. 32GB DDR4 3600 CL14. 3070Ti.
Old PC: Dual Xeon X5690@4.6GHz, EVGA SR-2, 48GB DDR3R@2000MHz, Intel X25-M. GTX 980ti.
Older PC: K6-3+ 400@600MHz, PC-Chips M577, 256MB SDRAM, AWE64, Voodoo Banshee.