First post, by toothpick
Hello,
So I need some help or advice on how-to install Windows 98 SE on an SSD using a SATA=> IDE converter.
Info:
Motherboard: MS-6119 flashed with version 2.9 Award Bios
SSD: 128 GB Kingston (formatted to FAT32 using Gparted)
When I boot the computer the system identifies the SSD drive as the primary IDE disk. However, I get stuck at the boot-up showing "Systems Configurations" from there I'm stuck I've tried most settings I can think about in the BIOS and tried FAT16 on the SSD etc., without any success.
Any feedback or guidance would be more than welcome!
Best regards,
Fredrik