First post, by zandengoff
I have a Voodoo 2 SLI system that when a glide game is launched will black screen, change resolutions (currently 800x600) and freeze. I have two Voodoo 2 STB 12MB cards, only slightly different. One is a single side 90Mhz memory, the other is dual side 100Mhz memory. Independently, they both work on the system I have them in. I have tried both cards individually in both free PCI slots and have been able to play any Glide game (been using Unreal for testing). The OS is Windows XP. I have tried drivers from FastVoodoo, Koolsmokey, and the reference driver. SLI is detected in the control panel, along with 8MB frame buffer and 16MB memory as expected for a Voodoo 2 SLI system. They are not overclocked. They are set to the default 90Mhz factory setting (as confirmed by the Voodoo 2 OC control panel I have installed). No environmental variables have been set. I have also set the PC bios from plug N play os to not and back. SLI cable was recently purchased from an ebay seller as I never had an SLI setup before.
Any suggestions are welcome.
Thanks