How to fix 0D0C POST code error on ASUS P2B \ VOGONS

How to fix 0D0C POST code error on ASUS P2B

Topic actions

First post, by Kahenraz

Posted on 2021-09-08, 16:05

Kahenraz Offline

Rank l33t

Rank: l33t
Posts: 4002
Joined: 2004-01-22, 04:57

I was using this motherboard to test my slot 1 processors and found that all 133 Mhz FSB processors would fail to POST and report an error code 0D0C on my diagnostics card. This board supports 133 Mhz bus processors so it's not just the FSB speed.

This board was using the original version 1006 BIOS and there are several updates available. The BIOS was also suspect because at bootup it would identity a Pentium 3 as a Pentium 2.

I updated to the latest 1014 BIOS and it works great now.

IMG_20210908_115338_resize_76.jpg

Reply 1 of 2, by mr.cat

Posted on 2021-09-08, 17:05

mr.cat Offline

Rank Member

Rank: Member
Posts: 390
Joined: 2020-12-13, 11:56
Location: Finland

Thanks for reporting! So is that just missing microcodes in the old BIOS version or something else?

Reply 2 of 2, by Kahenraz

Posted on 2021-09-08, 17:27

Kahenraz Offline

Rank l33t

Rank: l33t
Posts: 4002
Joined: 2004-01-22, 04:57

It must be. I'm still testing with this board and have issues getting it to work with a Coppermine processor in a slocket. Despite having a generous selection of overclocking jumpers, it is very picky about what CPU is will accept.

Go to top of page Go to top of page

Back to General Old Hardware