I'm setting up a dhcp but seems i have difficulties to make it work.
I did microsoft loopback adapter, then from my wifi, i shared the internet with the loopback adapter.
Ran jdosbox, when entered qnx i used dhcp but it didn't worked, then I used the freebsd tcpip stack
io-net -d ne2000 ioport=0x300,irq=3 if=en0:192.168:255.255.255.0 -p tcpip
ifconfig en0 192.168.137.1
that didn't work either.
Will try to see if dhcp will work if i manually run the client and configure it. With tcpip i had partial success as i received a packages from the host but they didn't go thru.
Qnx 6.2.1 and qnx 6.3.2 and qnx 6.5.0 works under jdosbox but they requires bochs virtual disk mount features to work.
http://ftp.unixdev.net/pub/iso/QNX/qnxnc621.iso
If you want to test, here is the free non-commercial version of it. 😉
I set cycles to max and treshold from 1000 to 5000, also videocard memory size was set to 16mb so to start s3 savage pro card and use better graphics.
Qnx requires 1gb disk image, thought it uses no more than 150 but it requires pretty much of space. On 800 x 600 16million colours it runs quite smooth haha.
Please release a new version with pcap support, this will be awesome. Why you removed the pcap classes from the lastest version by the way?