First post, by RobDos
I have a ct4520 that does not detect the wave portion of the card.
There are two capacitors near what I think is the midi portion, see attached image. The capacitors are not bulged, but there is corrosion on the cap.
The card is a bit dirty, but I recall someone on here posting that a component frequently failed on some of these cards. The system I was testing it also did not have a -5V rail, but I checked the pin out and this card does not have a B5 pin so it's unlikely part of the issue assuming I read the diagram correctly.
What is typically the failure point on these units.
P3 Slot 1 - 512MB PC100 - 128GB SSD - RADEON 9200 SE , SB Awe64 ISA - GOTEK MOD