VOGONS


First post, by Predator99

User metadata
Rank l33t
Rank
l33t

Just like to share I got my Vermont Microsystems IM-1024 PGC-clone to display a picture, but I am afraid to get more out of it I need some software or documentation.

Its this card:

The attachment IM1024.jpg is no longer available
The attachment IMG_2950r.jpg is no longer available
The attachment IMG_2951r.jpg is no longer available

I was able to connect to my DELL LCD without any adapter. Just connected 4 wires: RGB and composite sync to VGA-PIN13.
https://www.seasip.info/VintagePC/pgc.html

The attachment pgc4.jpg is no longer available

To lazy for GND which may explain the bad image quality I got 😀 But I am happy it displays anything at all without converters or adapters.
Resolution is always 1024x768 @ 60Hz.

Also happy it displays the BIOS screen, was not sure if this card works as a secondary adapter only.

CGA emulation also works.

With the PGCBMP.EXE programm I only get a purple screen but no picture is displayed.

There seems to be a Windows 1.0 driver around but its use is quite limited...
https://pcem-emulator.co.uk/phpBB3/viewtopic.php?t=3187

So if anybody owns a driver disk or a manual I would be very happy to get a copy...

Reply 1 of 2, by Predator99

User metadata
Rank l33t
Rank
l33t
The attachment pgc1.jpg is no longer available
The attachment pgc2.jpg is no longer available
The attachment pgc3.jpg is no longer available

Reply 2 of 2, by thunderbird32

User metadata
Rank Newbie
Rank
Newbie

As far as drivers go, there are of course the Windows 1.x drivers you found, and also AutoCAD 2.62 natively supports the card. There are supposedly Windows 2.x drivers, but no one seems to have them. Only the Windows 1.x drivers work in emulation, but the latter could be helpful for you.