Reply 20 of 32, by Marco
- It is only a Two-ended Cable (1 Connector to Adapter, Other remaining to the HDD. And the HDD is terminated)
- I just enabled SCAMP and Plug&Play ID'ing and the error now went away.
So it should be ok 😀
Anyway I will get a "standard" 4-connector cable including terminator. I will test this as well while deactivating HDD onboard termination.
1) VLSI SCAMP 311 / 386SX@27,5 (non-W95: stable at 30MHz) / 8MB / CL-GD5428 / LAPC-I / Fast-SCSI AHA 1542CP (...which is disappointing)
2) SIS486 / 486DX/2 66 / 32MB / TGUI9440 / SCC-1&MT32 / CT2830