Freeway FW-6280BXDR/155 - VRM Controller Upgrade? \ VOGONS

Freeway FW-6280BXDR/155 - VRM Controller Upgrade?

Topic actions

First post, by SWZSSR

Posted on 2024-10-31, 05:09

SWZSSR Offline

Rank Newbie

Rank: Newbie
Posts: 50
Joined: 2018-01-16, 04:32
Location: South Australia

Hi all

Recently got my hands on a boxed Freeway FW-6280BXDR/155 Dual Slot-1 440BX board.

I noticed it is running two Analog Devices ADP3152 VRM controller chips which go down to 1.8volt only.

Is there any direct replacements out there supporting down 1.7v or lower? I have a pair of 1ghz/100 slot-1s id like to use…. Ive successfully done the vrm controller chip swap on ASUS boards before, curious if something can be done with these more basic SOIC-16 chips.

M919(3.4bf)/5x86@180/Banshee/SoundscapeElite/DOS6.22
5TH/Dual233MMX/MGA2164W/Voodoo2/AWE64Gold/NT4.0&W9X
P5A(1.6)/K6-3+550/Ti500/EWS64XL/W9X
CUV266-D/Dual1.4TUAL/HD4670AGP/XONAR/XP
780iFTW/QX9650/3x8800U/VISTAx64
X79Saber/4960X/TITANX/Bravura/XP

Reply 1 of 1, by SWZSSR

Posted on 2024-10-31, 14:26

SWZSSR Offline

Rank Newbie

Rank: Newbie
Posts: 50
Joined: 2018-01-16, 04:32
Location: South Australia

So it appears the RevC got a VRM redesign & coppermine support.

Go to top of page Go to top of page

Back to General Old Hardware