VOGONS

Freeway FW-6280BXDR/155 - VRM Controller Upgrade?

Topic actions

First post, by SWZSSR

Posted on 
User metadata
Rank Newbie
Rank
Newbie

Hi all

Recently got my hands on a boxed Freeway FW-6280BXDR/155 Dual Slot-1 440BX board.

I noticed it is running two Analog Devices ADP3152 VRM controller chips which go down to 1.8volt only.

Is there any direct replacements out there supporting down 1.7v or lower? I have a pair of 1ghz/100 slot-1s id like to use…. Ive successfully done the vrm controller chip swap on ASUS boards before, curious if something can be done with these more basic SOIC-16 chips.

M919(3.4bf)/5x86@180/Banshee/SoundscapeElite/DOS6.22
5TH/Dual233MMX/MGA2164W/Voodoo2/AWE64Gold/NT4.0
P5A(1.6)/K6-3+550/Ti500/EWS64XL/WIN9X
P6S5AT/Tualatin1.4/980XGL/DMX6Fire/XPLite
CUV4XDLS/Dual1.4TUAL/HD4670AGP/XONAR/XP
680i/QX6800/3x8800U/XiFi/VISTAx64

Reply 1 of 1, by SWZSSR

Posted on 
User metadata
Rank Newbie
Rank
Newbie

So it appears the RevC got a VRM redesign & coppermine support.

M919(3.4bf)/5x86@180/Banshee/SoundscapeElite/DOS6.22
5TH/Dual233MMX/MGA2164W/Voodoo2/AWE64Gold/NT4.0
P5A(1.6)/K6-3+550/Ti500/EWS64XL/WIN9X
P6S5AT/Tualatin1.4/980XGL/DMX6Fire/XPLite
CUV4XDLS/Dual1.4TUAL/HD4670AGP/XONAR/XP
680i/QX6800/3x8800U/XiFi/VISTAx64

Go to top of page Go to top of page
Back to General Old Hardware
Close window
Close window