VOGONS

Matsonic MS7112C

Topic actions

First post, by NyLan

Posted on 
User metadata
Rank Member
Rank
Member

Hi,

I bought this card recently with a slot1 PIII 500Mhz. As I didn't found lot of info for this Motherboard or posts here, I'm posting my experience 😀
So I put a slot1 PIII 850 and it was not correctly recognized ( but working fine )
Seems Matsonic was not using bios revision number, just the date of the release... I flashed a newer Bios and now the CPU is correctly recognized. For some reason I can briefly see a "Unknown Flash Type" when the computer starts, but no issues to report.

Attached file below :
The Bios I had : 10/25/99 ( Checksum 0B4DH ) - Filename Old.BIN
The Bios I flashed : 06/30/00 ( Checksum CB9EH ) - Filename 06302k.BIN
Had to use Awdflash 6.6
Also attached the manual

My Intel SE440BX-2 Intel's website Mirror : Modified to include docs, refs and BIOSes.
Proud owner of a TL866 II
Personal GitHub

Reply 1 of 3, by ciacara

Posted on 
User metadata
Rank Newbie
Rank
Newbie

Hi, could you take some pictures of the motherboard in certain positions?
I need to get the transistor code, can you help me?
Unfortunately the circuit diagram is not available online.

My passion for the world of computers starts with the Commodore.
3DFX and Amiga, the two Phoenixes!!!

Reply 2 of 3, by dionb

Posted on 
User metadata
Rank l33t++
Rank
l33t++

For what it's worth, "Matsonic" is one of the many synonyms PC Chips boards were sold under, so this "MS-7112C" is actually the same board as the ECS P6BAT-A+. Possibly looking for that will get you more hits (as OP hasn't posted on Vogons for almost 3 years).

Reply 3 of 3, by ciacara

Posted on 
User metadata
Rank Newbie
Rank
Newbie

Ok, thanks.
I knew it was a P6BAT-A+, but I thought I'd write in this post, a bit old actually.

My passion for the world of computers starts with the Commodore.
3DFX and Amiga, the two Phoenixes!!!

Go to top of page Go to top of page
Back to General Old Hardware
Close window
Close window