Reply 260 of 397, by Bondi
pool7 wrote on 2020-09-10, 22:57:
The first post of this thread mentions 5571 = 5570 + joystick port. There's also mentions that 5571 = 4871/9871. Have you tried the drivers for these?
Also, found a link that may be of interest hopefully: http://www.win3x.org/win3board/viewtopic.php? … tyle=30&t=19261
Good luck! 😀
Thank you, pool7. I'll have to try the 5570 and 5572 drivers and there are indeed chances that the card will work.
Mostly I'm hoping that the MPU-401 port will work in DOS.
The only card that 100% supports MPU-401 in bare DOS is Roland SCP-55. All other cards support it in Windows.
PS: For reference, the japanese manual (couldn't find an english one) for the 5571 mentions the following files in its DOS secti […]
PS: For reference, the japanese manual (couldn't find an english one) for the 5571 mentions the following files in its DOS section; however I couldn't find anything else about these:
Yeah, I've gone along this path with same result. I was also looking through old snapshots of ratoc website on archive.org. But no luck there as well. Found even their prehistoric website from 1996 https://web.archive.org/web/19970701035825/ht … lish/home.shtml But there are no drivers at all there.