First post, by douglar
- Rank
- Oldbie
Are there any good plans to for 3d models that let you stick a standard 50 mm fan on a generic cheapo heatsink ( say 50x50x20mm ) and then snaps onto socket 3 clips?
The approximate glass transition temperature temperatures for common printable materials are:
PLA: 60˚C
PETG, high-temperature PLA: 95 ˚C
ABS: 105˚C
Nylon: typically 70˚C or above ("Nylon" is a large family of similar polymers)
Polycarbonate: 145˚C