please tell me your planning a build with that sexy thing
I'm looking for a case with enough space to host everything without the need of a smurf squad (not the Grouchy Smurf though he's always "I hate going in the narrow case!") to service it each time I need to put my hands in it.
Yes, long sentence! 🤣
I'd like to have a plexi or acrylic model. It must show how cute it is 😀
Wow, P-II overdrives. Which OS do you plan to install? I would be interested to see how my SIV utility does and am wondering if the board SMBIOS information.
Wow, P-II overdrives. Which OS do you plan to install? I would be interested to see how my SIV utility does and am wondering if the board SMBIOS information.
Just tell me what OS would be best and I'll give it a spin.
Retro fun is retro fun 😀
Just tell me what OS would be best and I'll give it a spin. Retro fun is retro fun 😀
Given the age of the board I am unsure if Windows 2000 will run well so would be inclined to start with NT4 SP6 and once that is running also install one of Windows 2003, XP or 2000.
red-raywrote on 2020-12-31, 14:52:Given the age of the board I am unsure if Windows 2000 will run well so would be inclined to start with NT4 SP6 and once that is […] Show full quote
Just tell me what OS would be best and I'll give it a spin. Retro fun is retro fun 😀
Given the age of the board I am unsure if Windows 2000 will run well so would be inclined to start with NT4 SP6 and once that is running also install one of Windows 2003, XP or 2000.
How much memory will it have? With NT4 you can get away with 64MB, but more sill be needed for W2K and even more for WXP/2003.
Max Ram is 1024 in 8 slots, I have for sure 256 (8 x 32MiB). I have a lot of 32MiB only.
I can install NT 4 sp6 + 2K (sp required?) + Xp (sp required?).
I have for sure 256 (8 x 32MiB). I have a lot of 32MiB only.
I can install NT 4 sp6 + 2K (sp required?) + Xp (sp required?).
256MB should be fine. SIV should run OK with the W2K + WNT RTM releases, I know SIV was OK on W2K RTM a couple of days ago, but am unsure about WXP. My systems I tend to have W2K SP4 + security rollup, WXP SP3 and 2003 SP2.
What disk will the system have? I use an 17 GB SCSI drive partitioned as below. C: needs to be FAT16 as NT4 does not support FAT32.
red-raywrote on 2020-12-31, 15:23:256MB should be fine. SIV should run OK with the W2K + WNT RTM releases, I know SIV was OK on W2K RTM a couple of days ago, but […] Show full quote
I have for sure 256 (8 x 32MiB). I have a lot of 32MiB only.
I can install NT 4 sp6 + 2K (sp required?) + Xp (sp required?).
256MB should be fine. SIV should run OK with the W2K + WNT RTM releases, I know SIV was OK on W2K RTM a couple of days ago, but am unsure about WXP. My systems I tend to have W2K SP4 + security rollup, WXP SP3 and 2003 SP2.
What disk will the system have? I use an 17 GB SCSI drive partitioned as below. C: needs to be FAT16 as NT4 does not support FAT32.
Installed NT 4.0 Sp1 and would hang after a while.
Restarted in VGA mode and installed SP6a.
Had to restart in VGA mode again a set video resolution there and stopped hanging.
No USB. How do I?
Installing W2K SP4 now.
Last edited by Nexxen on 2021-01-03, 14:27. Edited 1 time in total.
Plexiglass AT case, I strongly believe none exists.
I could try to have one built but it could be quite expensive.
The trend started after 2000 so little to no chance on an AT format.
It is however simple to mod a blind i/o backplate. Drilling some extra holes if needed is simple too.
Good luck finding a nice one - here some options:. https://www.anandtech.com/show/1377