Serial mouse doesn't work - MOBO 486 VIP IO \ VOGONS

Serial mouse doesn't work - MOBO 486 VIP IO

Topic actions

Post a reply

First post, by wtatarek

Posted on 2019-03-17, 11:26

wtatarek Offline

Rank Newbie

Rank: Newbie
Posts: 1
Joined: 2019-02-20, 07:54

Hello,
I can't bring my mouse to life. The MOBO has onboard serial controller. I was trying to turn it off and put external controller card (which works perfectly with the same mouse on other system) but nothing changed... I use ctmouse.exe and mouse.com driver.
The board has a PS/2 connector too and it works with other mices. But I want to know what's the issue with serial port (if it is).
This is the last thing I have to complete to finish my perfect 486 computer.
Kindly regards,
Wiktor

Reply 1 of 3, by ZipoBibrok

Posted on 2019-06-30, 02:16

ZipoBibrok Offline

Rank Newbie

Rank: Newbie
Posts: 43
Joined: 2006-06-16, 18:29

I had similar problem. The board needs serial port bracket with staggered pinout, even though the manual lists the pinout as sequential.

Reply 2 of 3, by Windows9566

Posted on 2019-06-30, 07:55

Windows9566 Offline

Rank Member

Rank: Member
Posts: 321
Joined: 2015-04-30, 14:55
Location: USA

i had that same issue earlier with my asus vx97, i eventually got it working after i found some serial brackets at the thrift store.

Reply 3 of 3, by SSTV2

Posted on 2019-06-30, 19:55

SSTV2 Offline

Rank Oldbie

Rank: Oldbie
Posts: 532
Joined: 2014-11-19, 20:30

Check +12/-12V lines directly in ISA slot. If serial ports are detected, but mouse isn't (even by trying different I/O cards) most likely one of the 12V lines are absent due to corrosion on motherboard's power header or PSU sockets.

Go to top of page Go to top of page

Back to General Old Hardware

Main menu

Common searches