looking for a acpi compatible dual socket 7 motherboard \ VOGONS

looking for a acpi compatible dual socket 7 motherboard

Topic actions

Post a reply

First post, by Sphere478

Posted on 2021-03-01, 07:43

Sphere478 Offline

Rank Oldbie

Rank: Oldbie
Posts: 745
Joined: 2021-01-13, 04:45

Today I am learning about bios modding and am trying to figure out how to transplant a acpi table into my tyan s1564 bios. problem is I can't seem to find a good donor bios for my experiments

I have a chip programmer so bad flashes are no biggie

I figure if I can find a acpi dual socket 7 board bios with a 430hx chipset that may be a good place to start. so the obvious go to is the gigabyte 586dx but I checked it, no acpi table in the latest 1997 bios.

no other boards are coming to mind.. any ideas?

🖥Craziest socket 7 build on a 430tx chipset
🖥Dual socket 7 build

Reply 1 of 4, by The Serpent Rider

Posted on 2021-03-01, 08:26

The Serpent Rider Offline

Rank l33t

Rank: l33t
Posts: 3556
Joined: 2017-03-25, 19:07
Location: The Hole

bios with a 430hx chipset

ACPI is not supported by 430HX chipset. If to be specific, it must be supported by south bridge and PIIX3 does not.

Get up, come on get down with the sickness
Open up your hate, and let it flow into me

Reply 2 of 4, by Sphere478

Posted on 2021-03-01, 08:59

Sphere478 Offline

Rank Oldbie

Rank: Oldbie
Posts: 745
Joined: 2021-01-13, 04:45

The Serpent Rider wrote on 2021-03-01, 08:26:

bios with a 430hx chipset

ACPI is not supported by 430HX chipset. If to be specific, it must be supported by south bridge and PIIX3 does not.

I guess that’s something they added with the 430tx chip(set)?

🖥Craziest socket 7 build on a 430tx chipset
🖥Dual socket 7 build

Reply 3 of 4, by darry

Posted on 2021-03-01, 09:30

darry Offline

Rank l33t

Rank: l33t
Posts: 4125
Joined: 2014-01-20, 06:27
Location: Canada

Sphere478 wrote on 2021-03-01, 08:59:

The Serpent Rider wrote on 2021-03-01, 08:26:

bios with a 430hx chipset

ACPI is not supported by 430HX chipset. If to be specific, it must be supported by south bridge and PIIX3 does not.

I guess that’s something they added with the 430tx chip(set)?

With the PIIX4 southbridge, to be exact, which can be found coupled with the 430TX and the 440LX (assuming Wikipedia is to be trusted on this matter) .

Reply 4 of 4, by Sphere478

Posted on 2021-03-01, 09:42

Sphere478 Offline

Rank Oldbie

Rank: Oldbie
Posts: 745
Joined: 2021-01-13, 04:45

darry wrote on 2021-03-01, 09:30:

Sphere478 wrote on 2021-03-01, 08:59:

The Serpent Rider wrote on 2021-03-01, 08:26:

ACPI is not supported by 430HX chipset. If to be specific, it must be supported by south bridge and PIIX3 does not.

I guess that’s something they added with the 430tx chip(set)?

With the PIIX4 southbridge, to be exact, which can be found coupled with the 430TX and the 440LX (assuming Wikipedia is to be trusted on this matter) .

so there never was a acpi compatible dual socket 7 then? 🙁

Okay, I assume this means there is no way to fool it then from the bios anyway?

Someone mentioned using clover to create a virtual acpi enviroment? Any idea which version I should try? Or will any work on this old of hardware. There is a post they made lemme try to find it..

Here it is..
Re: Has anyone ever installed windows 7 on a non acpi motherboard? If so how?
I can download the version mentioned I’m betting it won’t even load though.. prob requires sse? Anyone with experience running clover on 586?

Maybe I can start with the oldest version and go from there..

🖥Craziest socket 7 build on a 430tx chipset
🖥Dual socket 7 build

Go to top of page Go to top of page

Back to General Old Hardware

Main menu

Common searches