First post, by dulu
CPU - P3-550
MOBO - Aopen AX6BC
system - win98se
I`m using drivers downloaded from http://www.mirosupport.de/
The problem is: there`s no way to hear the sound from this card. Neither from the DAC nor from the OPL. Dos mode is the only place the card gives any sign of life. I can use the SNDINDOS program to change the volume, irq, dma, ect.
https://abload.de/img/20211009_200256mjkps.jpg
https://abload.de/img/20211009_200405wlj72.jpg
There are no music and fx in the doom, but the game does not freeze.
In DN3D, when I turn off the music and turn on sound effects only, I get the message "sound blaster is not responding on selected port" Regardless of whether I choose the sound card type "sb pro (old)" or "sb pro 2.0 (new). Irq, dma are correct - I used them on this mobo with the sound blaster 2.0 and everything worked. When I try to turn fx off and turn on the music, I get "could not detect FM chip". Regardless of whether I choose the sound blaster or general midi.
The card has the ability (via the SNDINDOS program) to switch between compatibility with sound blaster pro or windows sound system. Tried to turn on WSS and run warcraft2, when I select effects via WSS the game says it cannot detect the card
In windows, the tab is also not detected - I have code 24 in the device manager all the time
https://abload.de/img/20211009_2002329kjk9.jpg
https://abload.de/img/20211009_2002251tkge.jpg
Finally, I will add that visually the card is flawless, I additionally checked the contact between the card and the slot in the board with a multimeter and everything is fine here too.