VOGONS


First post, by VoodooFX

User metadata
Rank Newbie
Rank
Newbie

Ok, maybe a bit weird question here, but does anyone knows what standard and size are the case screws of the unit?
I namely bought mine a while ago and it's missing two of the screws, I've done rudimentary measurements and ordered what I thought were the right ones, but they ended up not fitting at all.

I assume since this is a Japanese product, the standard these screws conform to is JIS (Japanese Industrial Standard) as opposed to the more common DIN/ISO standards?

Just asking, if anyone maybe knows. Thanks!

We may have years, we may have hours but sooner or later we all push up flowers.

Reply 3 of 5, by cyclone3d

User metadata
Rank l33t++
Rank
l33t++

I can measure and check thread pitch. My guess is it is a standard metric size.

Yamaha YMF modified setupds and drivers
Yamaha XG resource repository - updated November 27, 2018
Yamaha YMF7x4 Guide
AW744L II - YMF744 - AOpen Cobra Sound Card - Install SB-Link Header
Epstein didn't kill himself

Reply 4 of 5, by VoodooFX

User metadata
Rank Newbie
Rank
Newbie

Unfortunately, I couldn't find anything in the owner's manual, but I was able to find Service Notes here:
https://www.manualslib.com/manual/1014558/Rol … kii.html#manual

The scan is not of the best quality, but you can make out the text for the screw size, it's M3x6 B-Tight binding. Not sure what B-Tight stands for, but from the shape of it, it looks to be an ordinary DIN7985 type.

I guess I'll order some and find out 😀

Thanks for the help!

We may have years, we may have hours but sooner or later we all push up flowers.