VOGONS

Search

Common searches

Roland SC-55 MK2 screws

Topic actions

First post, by VoodooFX

Posted on 
User metadata
Rank Newbie
Rank
Newbie

Ok, maybe a bit weird question here, but does anyone knows what standard and size are the case screws of the unit?
I namely bought mine a while ago and it's missing two of the screws, I've done rudimentary measurements and ordered what I thought were the right ones, but they ended up not fitting at all.

I assume since this is a Japanese product, the standard these screws conform to is JIS (Japanese Industrial Standard) as opposed to the more common DIN/ISO standards?

Just asking, if anyone maybe knows. Thanks!

We may have years, we may have hours but sooner or later we all push up flowers.

Reply 3 of 5, by cyclone3d

Posted on 
User metadata
Rank l33t++
Rank
l33t++

I can measure and check thread pitch. My guess is it is a standard metric size.

Yamaha modified setupds and drivers
Yamaha XG repository
YMF7x4 Guide
Aopen AW744L II SB-LINK

Reply 4 of 5, by VoodooFX

Posted on 
User metadata
Rank Newbie
Rank
Newbie

Unfortunately, I couldn't find anything in the owner's manual, but I was able to find Service Notes here:
https://www.manualslib.com/manual/1014558/Rol … kii.html#manual

The scan is not of the best quality, but you can make out the text for the screw size, it's M3x6 B-Tight binding. Not sure what B-Tight stands for, but from the shape of it, it looks to be an ordinary DIN7985 type.

I guess I'll order some and find out 😀

Thanks for the help!

We may have years, we may have hours but sooner or later we all push up flowers.

Go to top of page Go to top of page
Back to Sound
Close window
Close window