I now have also this EIZO MD-B12 TIGA card. I purchased it with an 80386-33 based Olivetti M380XP9 machine. And I plan to use it, together with other cards (SB Pro 2, Adaptec 1542A, 3Com Etherlink 3). Unfortuantelly I don't have found any documentation on that card. Thanks above in this thread I have the drivers for several DOS applications, Windows 3.x and GEM/3.
I have a few questions about that card:
1. Hardware ressources (IRQ, DMA, Io-Ports) ? The card has no jumpers at all to configure the ressources.
2. User manual? I found only some general manuals of the TMS 34010 videop processor on the VGA card museum website.
3. The card has 4 SIMM sockets. Maximum size, minimum speed of the SIMMs, parity yes or no?
4. Linux drivers for older Linux distributions?
5. OS/2 Warp 3 drivers?
Additionally I wonder if it is normal that the card does not show anything already in BIOS Post or MS-DOS mode. It's clear that for that I need to have an additional VGA card, so I do, but the two cards are connected through VGA feature connector cable so I expected the TIGA card would pass through the VGA signal undtil the TIGA itself takes over making the picture. But it does not pass through. My ATI MACH 8 card which is installed in the same way does it.