VOGONS


Reply 60 of 155, by Madao

User metadata
Rank Member
Rank
Member

Ok, i make think about fearture connector in second 765VL-draft. It has low prio, sorry.

I hope, we got 15 minimum order for PCB in a german forum. Then i can order 25 pieces and sell 10 pieces pcb with compoment list here.
Who want it ? Pleas write me a PN with country, where you live. (i can ship worldwide, but i prefer: I ship more pieces to one people in USA and this people share pcb)

Notice:
One has borrowed me ARK1000VL and it is compared with Trio64V+ VLB on System Abit AN4R307 & AMD 5x86 @160Mhz.
Ark1000VL is faster than Trio64V+, but distance is in most case zero, only DOOM is ARK slight faster ( ARK 59.04 / Trio64V+ 58,63)

regards
matt

Reply 61 of 155, by Madao

User metadata
Rank Member
Rank
Member

PCBs is arrivied, since friday. ( i got 50 pieces, over half is reservered )

I'll write few people for selling of pcb. Pleas be patient.

regards
matt

Attachments

  • index.jpg
    Filename
    index.jpg
    File size
    246.44 KiB
    Views
    747 views
    File license
    Fair use/fair dealing exception

Reply 62 of 155, by keropi

User metadata
Rank l33t++
Rank
l33t++
Madao wrote on 2021-09-13, 03:42:
PCBs is arrivied, since friday. ( i got 50 pieces, over half is reservered ) […]
Show full quote

PCBs is arrivied, since friday. ( i got 50 pieces, over half is reservered )

I'll write few people for selling of pcb. Pleas be patient.

regards
matt

nice! I've been monitor this thread on and off thru time , kudos on finishing the project!!!!
I am interested in one or two if they can be spared 😀

🎵 🎧 PCMIDI MPU , Orpheus , Action Rewind , Megacard and MK8330 soundcard website

Reply 66 of 155, by cyclone3d

User metadata
Rank l33t++
Rank
l33t++

I would like one as well.

Yamaha YMF modified setupds and drivers
Yamaha XG resource repository - updated November 27, 2018
Yamaha YMF7x4 Guide
AW744L II - YMF744 - AOpen Cobra Sound Card - Install SB-Link Header

Reply 72 of 155, by matze79

User metadata
Rank l33t
Rank
l33t

Thanks, got my PCB + Building Kit.
Did not yet assemble it 😀

https://dosreloaded.de - The German Retro DOS PC Community
https://www.retroianer.de - under constructing since ever

Co2 - for a endless Summer

Reply 73 of 155, by Madao

User metadata
Rank Member
Rank
Member

Now: I can sell pcb

a pcb cost 8 USD and 10$ outside EU, inside EU 5,5$

I have ~10 piece PCB left.

Pleas write me a private message, if you're interessing on pcb.

Of coruse, only trio64V+
But Virge (325) may run on this PCB with patched ROM and heavy modified virge driver.

Reply 74 of 155, by Madao

User metadata
Rank Member
Rank
Member

And a next message.

I got couple graphic card, one is Trio64V2/DX. This chip has official no VLB support. I have soldered him to VLB . Yes, VLB Support is removed. (It locks 486 local bus very hard )

Reply 75 of 155, by feipoa

User metadata
Rank l33t++
Rank
l33t++

Do you know if there is sufficient space surrounding the memory pads to install SOJ-40 sockets? I suspect not due to the caps.

Ultimate 486 Benchmark | Ultimate 686 Benchmark | Cyrix 5x86 Enhancements | 486 Overkill Graphics | Worlds Fastest 486

Reply 77 of 155, by maxtherabbit

User metadata
Rank l33t
Rank
l33t
Madao wrote on 2021-10-28, 15:53:

No, it is never designed for using of SOJ Socket. (i hate SOJ /PLCC SMD Socket 😒 )

I don't much care for them either but there is a time and a place to use them.

Not to mention the footprint is identical so it doesn't take much to accommodate them (physical clearance)

Reply 78 of 155, by feipoa

User metadata
Rank l33t++
Rank
l33t++

I was going to put them on, but looks like caps are in the way. So I guess I'm not putting them on.

Ultimate 486 Benchmark | Ultimate 686 Benchmark | Cyrix 5x86 Enhancements | 486 Overkill Graphics | Worlds Fastest 486