First post, by Dog
I have a TUSL2-C that seems to be posting, but I can't get a picture out of it.
I tested the machine before the capacitor replacement and everything seemed to be working fine. I was able to get into an OS and get a game running.
The capacitor replacement was then done with a friend that is more experienced than I am with the process, then the motherboard was turned on.
The board gets power and there are no error beeps.
However I can't get any picture out of the board, and I'm a bit unsure what to do now.
I double checked that the video card, power supply, and RAM I was using didn't give me trouble on a CUBX-L motherboard. The video card does not use additional PSU power, but it seems to warm up when the motherboard is left running for a period. This seemed to indicate the GPU is getting power. I also attempted to clear the CMOS by removing the battery and re-seating it. We've also checked for cold solder joints and missing solder.
Does anyone have any ideas?
If needed I'm fine buying another working board to try to step through figuring out what happened. It was intended to be a learning experience, but I'm hoping for any suggestions before I potentially spend money and cause issues on a second board.