Finally found a matching monitor for my Aptiva setup. IBM model 6327-022. After cleaning and repairs, it turned out to be really good one. Left hinge for the controls door is broken, but it stays in place when closed. Other than that, it is now near perfect condition.

When I got it, it didn't show any image. Had to replace couple of capacitors and redo some solder joints on the neck board to get it going. VGA connector was crushed, so I had to straighten it. It was very tidy inside, almost no dust at all. It has nice Panasonic tube, that is really bright, colorful and sharp across the screen.

Only thing is, for some reason Aptiva's Creative Graphics Blaster EXXTREME (Permedia 2) won't output anyhing greater than 800x600@85Hz for it. When I was testing the monitor on another machine with S3 Savage4 Pro, it went up to 1280x1024@75Hz.

CrFr wrote on 2021-10-30, 14:04:

Finally found a matching monitor for my Aptiva setup. IBM model 6327-022. After cleaning and repairs, it turned out to be really […]
Show full quote

Finally found a matching monitor for my Aptiva setup. IBM model 6327-022. After cleaning and repairs, it turned out to be really good one. Left hinge for the controls door is broken, but it stays in place when closed. Other than that, it is now near perfect condition.

When I got it, it didn't show any image. Had to replace couple of capacitors and redo some solder joints on the neck board to get it going. VGA connector was crushed, so I had to straighten it. It was very tidy inside, almost no dust at all. It has nice Panasonic tube, that is really bright, colorful and sharp across the screen.

Only thing is, for some reason Aptiva's Creative Graphics Blaster EXXTREME (Permedia 2) won't output anyhing greater than 800x600@85Hz for it. When I was testing the monitor on another machine with S3 Savage4 Pro, it went up to 1280x1024@75Hz.

IMGP2123_.jpg

That’s a nice looking setup you’ve got there. So many nice, clean, understated IBM desktop units going back so many years. Now if only I had the desk space…

A bit of a glutton for dual-chip VGA / GPUs - no matter how much they struggled at the time. There’s something haphazard and inelegant about a dual-chip ‘solution’. Needless to say, I must have these quirky, cantankerous beasts.

ATI Rage Fury Maxx. Now to find a stable driver release for both Win98 and 2000.

HanJammer wrote on 2021-10-29, 11:49:

kixs wrote on 2021-10-29, 10:01:

Really guys! Thread about bought items and you're discussing Amiga for pages now!

OK... so... I bought this Amiga accelerator recently...
😜

In the context of it all.... Then. 😁 😁 😁 You cracked me up.
How good is it, and what big box is it for?

Caluser2000 wrote on 2021-10-29, 15:19:

kixs wrote on 2021-10-29, 10:01:

Really guys! Thread about bought items and you're discussing Amiga for pages now!

I bought my Amiga A600s.

Nice.... Congrats. It is a little sweet system. Are you planning on upgrading it with something?

Bought a set of Kickstart 3.1 Roms for my Amiga 1200. It turns out that TF-1230 will not work fully with Kick 3.0
It was not mentioned at the sellers product page, and so I found a Cloanto branded version.
The issue with running 3.0 is that the TF-1230 will not automatically add the memory that are onboard.

Speaking of TF-1230, it is a nice piece of hardware.... I also recieved that angled CF-IDE adaptor. Makes it look clean.

devius wrote on 2021-10-29, 11:24:

Can you move the Amiga discussion somewhere else please?

I will always post images/pictures of any type of hardware that I bought. Even Amiga.
Yes, Piccoline machines as well, if I ever have the money and space for it.

brostenen wrote on 2021-10-30, 16:22:

Caluser2000 wrote on 2021-10-29, 15:19:

kixs wrote on 2021-10-29, 10:01:

Really guys! Thread about bought items and you're discussing Amiga for pages now!

I bought my Amiga A600s.

Nice.... Congrats. It is a little sweet system. Are you planning on upgrading it with something?

I will keep one stock. The other I intend to up grade when time and funds permit. I was surprised here clear and flicker free the second hand lcd SONY tv was. It's great! No need for scan doublers or any of that no nonsense is need at all. Just hook the A6oo straight up to it. I really am a x86 but when these showed up over a couple of months on or local auction site at an amazingly low "buy it now" price I snapped them up. One previous owner was going back to the UK just wanted to get rid of it. It still has the UK power plug on it and I use an adapter to use on on our power sockets.

Caluser2000 wrote on 2021-10-30, 18:06:

brostenen wrote on 2021-10-30, 16:22:

Caluser2000 wrote on 2021-10-29, 15:19:

I bought my Amiga A600s.

Nice.... Congrats. It is a little sweet system. Are you planning on upgrading it with something?

I will keep one stock. The other I intend to up grade when time and funds permit. I was surprised here clear and flicker free the second hand lcd SONY tv was. It's great! No need for scan doublers or any of that no nonsense is need at all. Just hook the A6oo straight up to it. I really am a x86 but when these showed up over a couple of months on or local auction site at an amazingly low "buy it now" price I snapped them up. One previous owner was going back to the UK just wanted to get rid of it. It still has the UK power plug on it and I use an adapter to use on on our power sockets.

So it is a PAL version? You need one single thing for the 600. That is the relokick disk. It reboot's the 600 into Kick 1.3 for those few pesky titles.
Else it is great that you have an CRT to display the video signal. Personally I am using good speakers for all my vintage computer's.
That is anything Dos, C64 and Amiga, as I find that speakers in tv's and monitors are always crap.

brostenen wrote on 2021-10-30, 16:21:

In the context of it all.... Then. 😁 😁 😁 You cracked me up.
How good is it, and what big box is it for?

It's for Amiga 2000 (pretty much the only one which interests me - I have 3 such systems right now, at one point this year I had 9... One of these 3 is for sale and other 2 will stay with me indefinitely 😉 ). It's 68020@14Mhz so it's not great but not terrible either - around twice as fast as 68000. A2620 is one of the two original Commodore accelerators for A2000 (other one being A2630). It was OE for A2500. It let's you run Amiga Unix - main purpose why I was interested in it. For now I have it in a machine with A2091 SCSI controller and Vortex GoldenGate bridgeboard which I will probably move to the other machine (replacing it with A2088 bridgeboard I have) if I figure out why it doesn't want to boot with it onboard (may be easier than It looks - I havn't moved it with the CPU adapter when I first installed the card in it for tests).

Bought this abit is7 socket 478 for $5 on facebook. It came with a p4 3.0ghz and 512mb ddr. Not a bad deal.

jm8881 wrote on 2021-10-31, 06:05:

Bought this abit is7 socket 478 for $5 on facebook. It came with a p4 3.0ghz and 512mb ddr. Not a bad deal.

Looks like a killer XP/98 basis. Pretty board

Great find, congrats!
Afaik there are no drivers that work reliably for Win2k or Win XP, but I'd be happy to be proven wrong. I have one of these cards in my collection as well.

pixelatedscraps wrote on 2021-10-30, 16:03:

A bit of a glutton for dual-chip VGA / GPUs - no matter how much they struggled at the time. There’s something haphazard and inelegant about a dual-chip ‘solution’. Needless to say, I must have these quirky, cantankerous beasts.

ATI Rage Fury Maxx. Now to find a stable driver release for both Win98 and 2000.

gex85 wrote on 2021-10-31, 11:12:

Great find, congrats!
Afaik there are no drivers that work reliably for Win2k or Win XP, but I'd be happy to be proven wrong. I have one of these cards in my collection as well.

pixelatedscraps wrote on 2021-10-30, 16:03:

A bit of a glutton for dual-chip VGA / GPUs - no matter how much they struggled at the time. There’s something haphazard and inelegant about a dual-chip ‘solution’. Needless to say, I must have these quirky, cantankerous beasts.

ATI Rage Fury Maxx. Now to find a stable driver release for both Win98 and 2000.

Ditto. Anyone with a suggestion / link would be much appreciated!

ODwilly wrote on 2021-10-31, 08:45:

jm8881 wrote on 2021-10-31, 06:05:

Bought this abit is7 socket 478 for $5 on facebook. It came with a p4 3.0ghz and 512mb ddr. Not a bad deal.

Looks like a killer XP/98 basis. Pretty board

Thanks, I actually replaced the sony vaio motherboard in my xp build with it.

jm8881 wrote on 2021-10-31, 15:12:

ODwilly wrote on 2021-10-31, 08:45:

jm8881 wrote on 2021-10-31, 06:05:

Bought this abit is7 socket 478 for $5 on facebook. It came with a p4 3.0ghz and 512mb ddr. Not a bad deal.

Looks like a killer XP/98 basis. Pretty board

Thanks, I actually replaced the sony vaio motherboard in my xp build with it.

those sony are quite cheap heh I might remember it when I need a mobo

Ever since the recap of my KT3 Ultra2 failed to resurrect it (and it seems to have killed 2 Socket A CPU's in the process.. Grrr..) I was on the lookout for a universal AGP Socket A board with AthlonXP support. Well, finally I found one for ten bucks. MicroATX, so I can actually build a fairly small and fast Voodoo 3 with it. No idea what CPU it comes with, but beggars can't be choosers.

Should be fine if it's got a socketed CPU... I don't think ASRock did it, but ECS did... there were some mATX KT133 boards around with soldered in Morgan Durons 1.1, 1.2, 1.3 and then a couple of years later, same again with applebreds 1.4, 1.6 and 1.8 with I think KN266. Then there was maybe even a third go round with semprons, but unsure if they were socket A or socket 754. They are probably great if you want a win98 system cheap and don't wanna mess with it. But if you're tryna buy something that takes a variety of CPUs you want to avoid them of course. So kind of a PSA, confirm CPU is socketed when buying mATX "Socket A" combos.

More ewaste pickups
Yeah, another Voodoo Rush. This one looks like it'll work too. There's some unpopulated areas for ram. Makes me wonder if I could add some and get an 8mb card. I'd be interested to see if more ram could redeem it's bad reputation.

Creative Voodoo2 12mb. Pins are bent near the pink dot but don't seem broken. Let's hope it works.

A really old WDC i/o card and a memory module for an apple iie.

I actually have an apple iie mobo squirreled away, but I was immediately lost when I realized it won't take ISA cards. I guess it's not as simple to get working as an IBM compat. Maybe if I start collecting apple iie parts, i may be able to get it to work down the road. Or maybe I'm asking too much from luck.

Local thrift shop had a dual PCIe LGA775 board , Gigabyte GA-P35-DS4. It was a steal at just $25. I will be installing a Core 2 Extreme X6800 and a brace of 7800GTX for a representative period correct "Crysis PC". Also picked up a GF2, PCI SATA I card, a couple of vintage Microsoft mice in good condition and an IBM/Lenovo 40Y8686 external USB DVD drive, which I am hoping will be Win98SE compatible. Interestingly, they had entire boxes of some old vid cards such as the FireMV2200 (probably next to useless for DOS gaming) and probably 50 PNY 8400GS 1GB PCIe cards. I am wondering if those would be useful for DOS gaming on later hardware such as P4 and Athlon 64...