First post, by Sphere478
- Rank
- l33t++
I’ve been doing some mad experiments with my dual processor motherboard.
While encountering the multiplier locks on some of my chips this gave me an idea,
Maybe I could get one running at 166 and the other running at 200?🤷♂️ Why? Because for science!
I started out by setting 3x multi
I installed a pentium mmx 166 and 200. With the 200 in the primary socket.
It posts and detects 2 processors at 200mhz
Cpu-z even says dual 200mhz
But…
Super pi 16k says: 5.031 cpu0 vs 5.813 cpu1
Reboot and install actual pentium 200s and we get: 5.046 cpu0 vs 5.110 cpu1
What does it all mean? 🤔 I’ll let you decide.
Test conditions:
-Tyan s1564D (converted from S) w/jan j2 bios
-win2ksp4
-super pi mod 1.5
-affinity set between cpu 0 and 1 for different tests.
-Priority: real time.
-Asymmetric test cpu0 sy060 cpu1 sl27k
-symmetric test s-spec matched (will post numbers later)