Hi, can you give advice on where to get some small power supply board that would fit this case?
https://aukro.cz/minidesktop-pc-tulip-386sx-2 … -fdd-7006312688
It could be also atx. The case could be 3d printed and fan could be added, so the board itself could be enough. Cannot find the original one, so looking for alternatives now.
You might want this board ATX to AT pico Adapter! + Fan Headers Soft on/off, -5v, and 3.3v (Released) and a Pico ATX unit that converts an input voltage to PC voltages (Get from eBay or Amazon, Ali Express etc) which will require an external 12V power brick or laptop supply.
However, there might be some older "1U" blade server PSUs that are suitable, before they went to single 12V supply.
Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.
Perfect, that will help! Thank you very much!
considering the formfactor,
get yourself an AT to ATX PSU cable and a Pico ATX PSU,
since the AT pico adapter wont work for you.
Right to repair is fundamental. You own it, you're allowed to fix it.
How To Ask Questions The Smart Way
Do not ask Why !
https://www.vogonswiki.com/index.php/Serial_port
weedeewee wrote on 2022-03-11, 12:37:considering the formfactor, get yourself an AT to ATX PSU cable and a Pico ATX PSU, since the AT pico adapter wont work for y […]
considering the formfactor,
get yourself an AT to ATX PSU cable and a Pico ATX PSU,
since the AT pico adapter wont work for you.
I second that - no use looking for the original and a pico ATX with adapter should do just fine.
Wow, that tiny 386 is cute!
*looking up koruna-euro exchange rate*
I like jumpers.
