First post, by AlessandroB
-Intel® Pentium 4 1.5GHz with 400MHz1 Front Side Bus 256KB std and max / ECC / full speed
Processor and L2 cache in FC-PGA2 in mPGA478B socket
-Intel 845 chipset / 82845 Memory Controller Hub (MCH) /
82801BA I/O Controller Hub (ICH2) for PCI 2.2 bus, ATA-100 EIDE, ethernet MAC, USB, Low Pin Count Interface / 82802 Firmware Hub / National® 87360 Super I/O for diskette, parallel, serial, keyboard, mouse
Can i get almost to the end of DOS games with DX4 and then start immediately with pentium4? Could it be compatible via PCI with the ESS ES1938S Solo-1 cards I own? I could if it were compatible to use the Pentium 4 for the heavier DOS games if it worked
tnks