First post, by acadiel
Just built a retro 486DX2 system, 16MB RAM, 2GB HDD. Installed DOS 6.22, and WFW 3.11.
- BIOS is pretty standard AMI 486 BIOS. No real mods made.
- Installed Etherlink III and configured to IRQ11, 0x210 with the 6.1 utilities. Automatically configured, passes all tests.
- Installed SB Vibra16 PnP. Used CMTU to set to A220 I5 D0 H1 P300 T6. Config.sys used CTCM.EXE, and Autoexec used Diagnose, MixerSet, and CTCU.
- Cutemouse and OAKCDROM/MSCDEX only other additions in config.sys and autoexec.bat.
Windows 3.11 has the Etherlink III driver installed in Network Setup.
Here's my issue:
When I launch the 3C5X9PD packet driver with "LH C:\NET\3C5X9PD 0x60 11 0x210", it works fine. I can even launch Windows. However, when I exit Windows, it hangs. No DOS prompt. I can REM out the packet driver and go in and out of Windows to my heart's content.
Any ideas what I'm doing wrong? I've never done networking in DOS before - my first system was a Win95 after I moved from my Amiga 😀
Thanks!