First post, by idan182
Hi all
Retro AT computer with a CF adapter and weird problems.
I've changed 3 caps on the motherboard and it was working ok for some time.
Problem is, the CD drive + Hard disk working on the same IDE cable.
CD is the secondary master, sometimes it does recognize on bios and sometimes not.
The HD does the same sometimes.
It's not getting power from the button the first time. I can't hear the HD spins until I turn off and on the button again.
When it does spin, it gives me weird letters on bios.
I've tried to replace the ide cable, disconnect the master ide with the cf adapter but nothing.
Is it a bad motherboard or maybe a bad AT PSU?
The PSU looks fine inside with good caps.