RetroPC_King wrote on 2023-02-07, 11:33:

Also today I got 5 optical drives. They are: 1st column (from top to bottom): -LG 52x32x52x CD-RW drive IDE (GCE-8525B) (white b […]
Show full quote

Also today I got 5 optical drives. They are:
1st column (from top to bottom):
-LG 52x32x52x CD-RW drive IDE (GCE-8525B) (white bezel)
-ASUS DRW-1608P3S (OEM ASUS rebranded Pioneer DVR-111) 16x DVD writer X Multi IDE (black bezel)
-GIGABYTE GO-R5232C 52x32x52x CD-RW IDE
2nd column (from top to bottom):
-ASUS DRW-1608P2 (OEM ASUS rebranded Pioneer DVR-110D) 16x DVD writer IDE (white bezel)
-LG GCR-8253B 52x CD-ROM IDE (white bezel)

Any opinions?

Spare optical drives are always handy to have, I have a small pile of them myself.

Ozzuneoj wrote on 2023-02-07, 06:05:

So... uh. […]
Show full quote

So... uh.

I found something a couple days ago...

😮😨😩😖
t3d1.jpg
🦄🦄🦄

It was more than I normally spend on things like this, but I couldn't pass it up, being the only one I have ever seen for sale.

...and... then I found something else right after that...

😐

😑

😐

😐

😦

😳

😨

😱😱😱😱
t3d_boxed.jpg
🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄

Still in shock.

One Paradise Tasmania 3D to tinker with and one sealed for the collection within about 15 minutes of each other. 🥴😵🥴😵

Expect a thread once I receive these. There isn't much coverage of them here as far as I can tell.

$30 for a sealed card of this age is a good deal.

About a month ago I ran across some Diamond Speedstar ISA board, don't know the exact model, new in open box. Bidding started at $30 or maybe a penny less and only one winning bid. I would have bid on it but it was too late. The listing title wasn't conducive to being found in searches.

HanJammer wrote on 2023-02-07, 11:10:

I would definitely play this tank game. That's the exact graphics style I love (untextured, or in this case - barely textured - low poly 3D vector graphics). Anybody knows it's name?

is it this one?

MMaximus wrote on 2023-02-07, 13:24:

HanJammer wrote on 2023-02-07, 11:10:

I would definitely play this tank game. That's the exact graphics style I love (untextured, or in this case - barely textured - low poly 3D vector graphics). Anybody knows it's name?

is it this one?

Heh check my post above .. both picked the same game, im pretty sure its the one. It looks cheesy as fuck ...kinda tempted to give it a try myself.

TrashPanda wrote on 2023-02-07, 13:30:

MMaximus wrote on 2023-02-07, 13:24:

HanJammer wrote on 2023-02-07, 11:10:

I would definitely play this tank game. That's the exact graphics style I love (untextured, or in this case - barely textured - low poly 3D vector graphics). Anybody knows it's name?

is it this one?

Heh check my post above .. both picked the same game, im pretty sure its the one. It looks cheesy as fuck ...kinda tempted to give it a try myself.

oh sorry I didn't notice you posted about it already 😅

The Youtube video I linked to actually said what the games were and had a link in the description to the VOGONS thread that talks about those two games. I guess I could have mentioned them in my post, but I thought between the YT link and the box picture I uploaded with the games advertised on it that was sufficient. 😀

3D Accelerated Games List (Proprietary APIs - No 3DFX/Direct3D)

On that note... wow, things are looking pretty grim for this card. I had somehow missed that Tasmania3D versions of the three other games that were advertised to use it have never been located anywhere. So, the two games that come in the retail box are the *only* games known to utilize the card. 😮

And just to be clear, those games are FX Fighter and Tank Commander. I believe both are exclusively accelerated by the Paradise 3D.

EDIT: OH MY... 🤣 🤣

"Shipping with Tasmania 3D are two of the most popular PC games available today: FX Fighter, with its fluid motions and fast pace, and Tank Commander, which combines fast-paced arcade game play with strategic planning. In addition, for a limited time, Tasmania 3D customers can register with Philips to receive three more exciting games from Mindscape: SU-27 Flanker, CyberSpeed and Air Power. "

https://web.archive.org/web/20140912050505/ht … w...-a018176320

🤣 🤣

So many HUGE lies in that press release... wow! Zero Direct3D support, no functional API support of any kind... A company would be completely destroyed for something like this these days.

Got the remains of an old computer with some other parts for 20 euro.

Diamond Stealth 64 DRAM and Quantum ISA-200S are in working condition, the two FDDs and the CPU are still untested, and of course MB is destroyed by the battery.
The funny part is when I observed the MB near the window, a tramp passed by on the street with a big old PC. A minute later we had a deal for 1 euro, gave him 2.
The PC is working, with MS8308ep 266 MB, 1.2GHz Duron, lot of RAM and 60GB HDD. The case is not so bad and big enough to fit P4 MB and FX 5900 XT with huge passive cooler,
an old project that sits in carton box because it needs wider case.

DundyTheCroc wrote on 2023-02-07, 17:20:

Got the remains of an old computer with some other parts for 20 euro. parts.jpg Diamond Stealth 64 DRAM and Quantum ISA-200S ar […]
Show full quote

Got the remains of an old computer with some other parts for 20 euro.
parts.jpg
Diamond Stealth 64 DRAM and Quantum ISA-200S are in working condition, the two FDDs and the CPU are still untested, and of course MB is destroyed by the battery.
The funny part is when I observed the MB near the window, a tramp passed by on the street with a big old PC. A minute later we had a deal for 1 euro, gave him 2.
The PC is working, with MS8308ep 266 MB, 1.2GHz Duron, lot of RAM and 60GB HDD. The case is not so bad and big enough to fit P4 MB and FX 5900 XT with huge passive cooler,
an old project that sits in carton box because it needs wider case.
case2.jpg

Remarkable, an AMR slot that has something in it!

DundyTheCroc wrote on 2023-02-07, 17:20:

Got the remains of an old computer with some other parts for 20 euro. parts.jpg Diamond Stealth 64 DRAM and Quantum ISA-200S ar […]
Show full quote

Got the remains of an old computer with some other parts for 20 euro.
parts.jpg
Diamond Stealth 64 DRAM and Quantum ISA-200S are in working condition, the two FDDs and the CPU are still untested, and of course MB is destroyed by the battery.
The funny part is when I observed the MB near the window, a tramp passed by on the street with a big old PC. A minute later we had a deal for 1 euro, gave him 2.
The PC is working, with MS8308ep 266 MB, 1.2GHz Duron, lot of RAM and 60GB HDD. The case is not so bad and big enough to fit P4 MB and FX 5900 XT with huge passive cooler,
an old project that sits in carton box because it needs wider case.
case2.jpg

I like both of those cases.😃 Splendid deal too!👍
The 5.25" FDD with the broken lever reminds me of the Colani designs that were popular here.
What's the air intake situation on the ATX case? The front looks like it will breathe well.

Ozzuneoj wrote on 2023-02-07, 06:05:

So... uh.

I found something a couple days ago...

That's incredible. There haven't been any known cards for sale since I got mine back in 2014, then we get TWO Tasmanias at almost the same time!

From my knowledge, you are now own the fourth and fifth cards that are known to be in hands of collectors, and the only sealed one.

Saw some DDR 500 PC4000 sticks pop up on evilbay and grabbed them, they were priced reasonably well actually expected them to be much higher considering rarity.

OCZ 1GB stick, yup I know how some feel about OCZ but I have not had any issues with their memory.

Pair of Corsair sticks, one being the 512Mb DDR 500 and the other will be heading to the scrap DDR storage box where all 512Mb DDR 400 sticks go. (It being CL2 means it ll live longer than the other trash DDR400 I have)

Also grabbed this PCI X-FI Fatality card with its drive bay box as it was also listed for a lot less than I normally see them.

Doornkaat wrote on 2023-02-07, 20:57:

I like both of those cases.😃 Splendid deal too!👍
The 5.25" FDD with the broken lever reminds me of the Colani designs that were popular here.
What's the air intake situation on the ATX case? The front looks like it will breathe well.

Yes, there is even a place for cooling fan.

Today I got this ASUS K8N-E Socket 754 motherboard with I/O Shield. I plan to use it with a AMD Sempron 3000+. Opinion?

Anyone ever seen a K6 with weird part numbering ?

Never seen a K6 CPU using the PR2 numbering and having a look on Google it seems to suggest this is one of the first variants of the K6, 2.9v also leads to me believe this is one of the 350nm models. I have one of the later 250nm versions I wonder how this older model compares, not sure I would use this one tho as it appears to be NOS and still unused/sealed. Still there is something special about being the first person to power up a new CPU and see it roar into life.

Wikipedia has a little info on this and its one of the 350nm versions, bet it runs hot as a furnace.

I've still been trying to get my hands on a SW20PC, but have not seen one for sale in quite a while.

V

Vanessaira wrote on 2023-02-08, 12:43:

I've still been trying to get my hands on a SW20PC, but have not seen one for sale in quite a while.

V

Yamaha Sound Edge SW20-PC ?

Speaking of odd Midi stuff, just ran into a boxed LynxONE . .has two buffered midi ports, its got a massive Altera IC on it .. not entirely sure what its for but I'm assuming its a Midi mixer card. Two are 24 bit analog two are 24bit/96kHz digital, never seen such a beast before.

https://www.soundonsound.com/reviews/lynx-stu … nology-lynx-one

So this thing really is a beast, I don't have a use for it but damn if it aint impressive for its age.

If only I was into Midi . .which im not, that rabbit hole is too dark and deep and filled with weird mutant rabbits.

TrashPanda wrote on 2023-02-08, 13:33:

Vanessaira wrote on 2023-02-08, 12:43:

I've still been trying to get my hands on a SW20PC, but have not seen one for sale in quite a while.

V

Speaking of odd Midi stuff, just ran into a boxed LynxONE . .has two buffered midi ports, its got a massive Altera IC on it .. not entirely sure what its for but I'm assuming its a Midi mixer card. Two are 24 bit analog two are 24bit/96kHz digital, never seen such a beast before.

I always associate Altera with FPGAs, but they may have produced other chips (i use a past tense because Altera is now part of Intel).

TrashPanda wrote on 2023-02-08, 13:33:

Yamaha Sound Edge SW20-PC ? […]
Show full quote

Vanessaira wrote on 2023-02-08, 12:43:

I've still been trying to get my hands on a SW20PC, but have not seen one for sale in quite a while.

V

Yamaha Sound Edge SW20-PC ?

Speaking of odd Midi stuff, just ran into a boxed LynxONE . .has two buffered midi ports, its got a massive Altera IC on it .. not entirely sure what its for but I'm assuming its a Midi mixer card. Two are 24 bit analog two are 24bit/96kHz digital, never seen such a beast before.

https://www.soundonsound.com/reviews/lynx-stu … nology-lynx-one

So this thing really is a beast, I don't have a use for it but damn if it aint impressive for its age.

If only I was into Midi . .which im not, that rabbit hole is too dark and deep and filled with weird mutant rabbits.

Yeah, my bad as a forum fail. Thought I had clicked on latest post and ended up responding to old post. Yeah definitely in the rabbit hole which is why I really want one. OPL4 is an odd beast and its one of the few pieces I do not have.

V

acl wrote on 2023-02-08, 13:49:

TrashPanda wrote on 2023-02-08, 13:33:

Vanessaira wrote on 2023-02-08, 12:43:

I've still been trying to get my hands on a SW20PC, but have not seen one for sale in quite a while.

V

Speaking of odd Midi stuff, just ran into a boxed LynxONE . .has two buffered midi ports, its got a massive Altera IC on it .. not entirely sure what its for but I'm assuming its a Midi mixer card. Two are 24 bit analog two are 24bit/96kHz digital, never seen such a beast before.

I always associate Altera with FPGAs, but they may have produced other chips (i use a past tense because Altera is now part of Intel).

its an Altera Flex FPGA ....jesus the damn card can be programmed. I wonder if its worth grabbing just because of that FPGA on it.

TrashPanda wrote on 2023-02-08, 10:43:

Anyone ever seen a K6 with weird part numbering ? […]
Show full quote

Anyone ever seen a K6 with weird part numbering ?

Old K6 numbering.jpg

Never seen a K6 CPU using the PR2 numbering and having a look on Google it seems to suggest this is one of the first variants of the K6, 2.9v also leads to me believe this is one of the 350nm models. I have one of the later 250nm versions I wonder how this older model compares, not sure I would use this one tho as it appears to be NOS and still unused/sealed. Still there is something special about being the first person to power up a new CPU and see it roar into life.

Wikipedia has a little info on this and its one of the 350nm versions, bet it runs hot as a furnace.

Yah they started off with PR numbering then killed it quick. I don't think that one will be too super hot, they only got real hot when pushed to 200 and above and needed more than the 2.9V, The 233 needed 3.2... you might find that one does 233 with 3.2 and a socket A heatsink on it. Though you probably want to keep it "nice" since it's unusual marking, and I have seen that kind of printing damaged by wet heatsink compounds and stuff required to remove it, so maybe wanna get one of those graphite pads or something. I've got a 3.2/233 and test run it on a couple of boards, but chickened out when the regs got ouchy hot, so until I find a board that it doesn't seem to want to kill, it sits in the spare CPUs box.