First post, by leon22
I tried to program this EEPROM (Gigabyte GA-486AM/S) but it always stops the execution immediately:
APP Version : 12.60 Model : TL866II Plus
Device : SST39SF010A
Pins Detected Passed!
Erase ...Succeeded. Time : 0.407 S
Programming FLASH ...
ERROR! Address:0x000000 Buffer Data:0x0025 Verify:0x009A
Programming ...Failed
Do I need some special settings to program that EEPROM? (the ERASE has worked because the Blank check responded OK)
=> without the FLASH option it seems that it worked but it was way too fast and still nothing is on the ROM.
sudo minipro -p "SST39SF010A" -D
Found TL866II+ 04.2.132 (0x284)
Chip ID mismatch: expected 0xBFB5, got 0xFFFF (unknown)
=> is the EEPROM dead?