First post, by mikeyp
I have a Toshiba T3400CT with DOS 6.00 and Windows 3.1. Only problem is, as good as I am with Windows 95 to anything modern, Windows 3.X is a little before my time and I'm a bit stumped. I'd like to use the PCMCIA slot . I have obtained a couple of cards I believe should work nicely; a 3com EtherLink III LAN PC Card (3C589C) and a DELL Audio PCMCIA card Type CB-001. I believe the latter to be a rebranded IBM 3D Sound card as it says Assembled in Canada, Made for Dell by IBM.
I have two problems, one is a complete lack of correct drivers and the other is a complete lack of knowledge of how to install PCMCIA devices in Windows 3.1. Any help in both regards appreciated please.
So far, if I plug in the the cards, the Toshiba/Phoenix PCMCIA utility in control panel reports the following:
The 3com card:
Socket 1 status - 3Com Corporation - 3C589 - Configured: NO
The Dell audio card:
Socket 1 status - IBM - NON-DSP AUDIO - Configured: NO